what software are you using and how do you get past the access difficulties


Ray T. Mahorney
WA4WGA


-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]] On Behalf Of DAN REID
Sent: Saturday, July 28, 2012 16:01
To: [log in to unmask]
Subject: Re: wouxun

Anyone have any difficulties during setup matching the ports between the =
radio and computer?
My device manager shows the port com4 and the program bullets com1.
thanks,
dan (kb6unc)  =20
  ----- Original Message -----=20
  From: Ray T. Mahorney<mailto:[log in to unmask]>=20
  To: =
[log in to unmask]<mailto:[log in to unmask]>=20
  Sent: Saturday, July 28, 2012 6:07 AM
  Subject: Re: wouxun


  first depending on who you bought it from you may get it open across =
its range so be mindful of that
  and don't accidently transmit on the local NOAA freq.  You're going to =
find that the 6 radios are
  narrow band compliant.  This means the transmiter will also transmit =
FMN and the receiver will tune
  FMN as well.  In the frequency step menu which is menu 1 option 0 will =
set your tuning step to 2.5
  kHZ.  My 6d appears to skip menu 27 and I cant get any guidance as to =
why this is so I will be
  interested to see if yours does the same thing.  Like all of these =
radios, yours will come up
  talking so no problem there. The 6d looks feels and acts like a =
commercial radio even down to the
  carrier drop.  Anyone who has had any experience with Motorola or =
Vertex commercial radios should
  know what I am talking about.  In closing:  In my experience and I =
have only had the thing just
  under 2 weeks it won't take you long to get it up on the air at all.  =
One more thing about the
  menus; The menus you are likely to use most frequently are the ones =
which are communicative.  Menus
  1 2 3 4 7 8 9 and the menus which control offset offset direction and =
memory reading and writing.
  Hope that helps and let us know how you get on. =20


  Ray T. Mahorney
  WA4WGA


  -----Original Message-----
  From: For blind ham radio operators =
[mailto:[log in to unmask]] On Behalf Of DAN REID
  Sent: Friday, July 27, 2012 21:33
  To: =
[log in to unmask]<mailto:[log in to unmask]>
  Subject: wouxun

  Greetings,
  I'm looking for helpful hints or instructions for the Wouxun kg-uv6x.
  Any help is greatly appreciated.
  Thanks,
  dan (kb6unc) =20