Subject: | |
From: | |
Reply To: | |
Date: | Thu, 13 Dec 2012 17:59:00 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Mike,
I'd check some of your connecting cables. I always get 1:1 SWR on all
bands when I run the rig into a dummy load, and that's using a switch to
switch from the antenna and tuner network to the dummy load.
Steve
On 12/13/2012 14:19, Michael Ryan wrote:
> Sent from my iPhone
>
> Begin forwarded message:
>
>
>> From: Michael Ryan<[log in to unmask]>
>> Date: 13 December, 2012 3:45:01 PM NST
>> To: Michael Ryan<[log in to unmask]>
>> Subject: Re_TW-1 inaccuracies
>>
>> Hi All:
>>
>> Just tuned up my FT-102 into a dummy load and got the following results.
>> 3.750 183 key down, 7150 169 key down and 14.175, again 169 key down.
>> The meter also reported a reflected power of 1.9, 1.6 and 1.2 and an SWR of 1.2/1 on all 3 tested bands.
>> On SSB, I got a peak of 180. I got the rig connected to the meter, then to an ant switch, then to the dummy load.
>> I'm guessing that those would present something to the meter and a little inaccuracy won't hurt. I know my 102 peaks at 225 as was read to me by my Elmer using the rigs power meter on SSB and 180 key down.
>> I use those inaccuracies as safeties and run my gear according too. On another note, I don't think I'd shove 1500W CW through the thing or 2KW SSB due to its construction.
>> Guess I get about a 10/15% inaccuracy. Never had an opportunity to compare to a good Bird watt meter.
>>
>> 73:
>>
>> Michael DE VO1AX
>>
>>
>>
>
>
|
|
|