Read the messages before you comment, he has a manual tuner he just bought
and an auto tuner, he just wants to get either of them working.
----- Original Message -----
From: "Howard, W A 9 Y B W" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Thursday, June 28, 2012 8:48 PM
Subject: Re: 2 tners that don't work, how much more can I take!
> John,
>
> Harry is not using an auto tuner. Please don't confuse him any Further.
>
> 73
>
> Howard #3
> ----- Original Message -----
> From: "John Miller" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Thursday, June 28, 2012 5:20 PM
> Subject: Re: 2 tners that don't work, how much more can I take!
>
>
>> You still need coax with the auto tuner to go to the radio, the 6 pin
>> connector only gives the tuner power and the signal when to tune when you
>> push the button, if you don't have coax from the radio to tuner as well,
>> there's no RF to the tuner.
>> ----- Original Message -----
>> From: "Harry Brown" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Thursday, June 28, 2012 4:11 PM
>> Subject: Re: 2 tners that don't work, how much more can I take!
>>
>>
>>> Yep, that's for sure, and I tryed connecting the antennas coax to coax =
>>> 1, and also tryed coax 2, both on the antenna tuner.
>>> Trippy
>>> ----- Original Message -----=20
>>> From: John Miller=20
>>> To: [log in to unmask]
>>> Sent: Thursday, June 28, 2012 3:06 PM
>>> Subject: Re: 2 tners that don't work, how much more can I take!
>>>
>>>
>>> You should still need coax to connect to that tuner along with that =
>>> jumper.
>>> ----- Original Message -----=20
>>> From: "Harry Brown" <[log in to unmask]>
>>> To: <[log in to unmask]>
>>> Sent: Thursday, June 28, 2012 2:42 PM
>>> Subject: Re: 2 tners that don't work, how much more can I take!
>>>
>>>
>>> > Hi Gery,
>>> > The jumper is plugged into the 570, where the jumper is suppose to =
>>> plug =3D
>>> > into, and it's not coax 1, or coax 2.
>>> > Trippy
>>> > ----- Original Message -----=3D20
>>> > From: Gerry Leary=3D20
>>> > To: [log in to unmask]
>>> > Sent: Wednesday, June 27, 2012 5:12 PM
>>> > Subject: Re: 2 tners that don't work, how much more can I take!
>>> >
>>> >
>>> > What connector on the transceiver is the Coax on?
>>> > ----- Original Message -----=3D20
>>> > From: "Harry Brown" <[log in to unmask]>
>>> > To: <[log in to unmask]>
>>> > Sent: Wednesday, June 27, 2012 1:57 PM
>>> > Subject: Re: 2 tners that don't work, how much more can I take!
>>> >
>>> >
>>> > > Hi Gery,
>>> > > Yep, the jumper cable goes from the 570 to the so239 connecter =
>>> on =3D
>>> > the =3D3D
>>> > > antenna tuner that says transmitter, and, the coax for the =
>>> antenna =3D
>>> > is =3D3D
>>> > > connected to the so239 connecter on the antenna tuner that says =
>>> coax =3D
>>> > 1.
>>> > > Trippy
>>> > > ----- Original Message -----=3D3D20
>>> > > From: Gerry Leary=3D3D20
>>> > > To: [log in to unmask]
>>> > > Sent: Tuesday, June 26, 2012 11:23 PM
>>> > > Subject: Re: 2 tners that don't work, how much more can I take!
>>> > >=3D20
>>> > >=3D20
>>> > > Are you sure that you have the right plug on the transceiver?
>>> > > ----- Original Message -----=3D3D20
>>> > > From: "Harry Brown" <[log in to unmask]>
>>> > > To: <[log in to unmask]>
>>> > > Sent: Monday, June 25, 2012 6:05 PM
>>> > > Subject: 2 tners that don't work, how much more can I take!
>>> > >=3D20
>>> > >=3D20
>>> > > > Hi all,
>>> > > > Well, $176.90, down the drain for the mfj949e.
>>> > > > I plug in the antenna into coax 1, and the jumper from the =
>>> =3D
>>> > Kenwood =3D3D
>>> > > 570, =3D3D3D
>>> > > > and the other end of the jumper to the transmit port, it's =
>>> also =3D
>>> > an =3D3D
>>> > > so239 =3D3D3D
>>> > > > connecter, and folks, I disabled the tuner in the 570, and =
>>> =3D
>>> > adjusted =3D3D
>>> > > for =3D3D3D
>>> > > > loudest noise, and there is no loudest noise!
>>> > > > So, it's a bad tuner.
>>> > > > Then, we have the kenwood kt1, autotuner, and so I tryed =
>>> that. I =3D
>>> > =3D3D
>>> > > plugged =3D3D3D
>>> > > > the antenna in to that tuner, and I pluged in the power cable
>>> =
>>> =3D
>>> > that =3D3D
>>> > > went =3D3D3D
>>> > > > from the kt1 to the radio.
>>> > > > Then, I press the tune button on the kt1, and no tuning =
>>> noise. =3D
>>> > =3D3D
>>> > > However, =3D3D3D
>>> > > > I then reenabled the autotuner in the radio, and pressed the =
>>> tune =3D
>>> > =3D3D
>>> > > button =3D3D3D
>>> > > > on the radio, and the kt1 tuner made a noise, like it's =
>>> tuning =3D
>>> > it, =3D3D
>>> > > but =3D3D3D
>>> > > > of course, we know that since the 570 tuner is now enabled, =
>>> the =3D
>>> > kt1 =3D3D
>>> > > is =3D3D3D
>>> > > > not gonna tune it.
>>> > > > I am so tired, just absolutely sick and tired, this is hell =
>>> for =3D
>>> > me.
>>> > > > Also, Bob, k8lr, I'll call ya tomorrow, or, you can call me, =
>>> best =3D
>>> > =3D3D
>>> > > time =3D3D3D
>>> > > > is in the afternoon, between 1240 till 3, and anytime after =
>>> 4.
>>> > > > I'm looking forward to getting your help with echo link.
>>> > > > I just wonder sometimes if I'm never ment to get on hf again.
>>> > > > I hope not, I just got the extra and I can't use it now.
>>> > > > So much for motivation to get the extra, that was the =
>>> motivation, =3D
>>> > =3D3D
>>> > > just =3D3D3D
>>> > > > to use those extra frequencies.
>>> > > > Trippy, ac8s
>>> >
|