John,
Harry is not using an auto tuner. Please don't confuse him any Further.
73
Howard #3
----- Original Message -----
From: "John Miller" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Thursday, June 28, 2012 5:20 PM
Subject: Re: 2 tners that don't work, how much more can I take!
> You still need coax with the auto tuner to go to the radio, the 6 pin
> connector only gives the tuner power and the signal when to tune when you
> push the button, if you don't have coax from the radio to tuner as well,
> there's no RF to the tuner.
> ----- Original Message -----
> From: "Harry Brown" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Thursday, June 28, 2012 4:11 PM
> Subject: Re: 2 tners that don't work, how much more can I take!
>
>
>> Yep, that's for sure, and I tryed connecting the antennas coax to coax =
>> 1, and also tryed coax 2, both on the antenna tuner.
>> Trippy
>> ----- Original Message -----=20
>> From: John Miller=20
>> To: [log in to unmask]
>> Sent: Thursday, June 28, 2012 3:06 PM
>> Subject: Re: 2 tners that don't work, how much more can I take!
>>
>>
>> You should still need coax to connect to that tuner along with that =
>> jumper.
>> ----- Original Message -----=20
>> From: "Harry Brown" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Thursday, June 28, 2012 2:42 PM
>> Subject: Re: 2 tners that don't work, how much more can I take!
>>
>>
>> > Hi Gery,
>> > The jumper is plugged into the 570, where the jumper is suppose to =
>> plug =3D
>> > into, and it's not coax 1, or coax 2.
>> > Trippy
>> > ----- Original Message -----=3D20
>> > From: Gerry Leary=3D20
>> > To: [log in to unmask]
>> > Sent: Wednesday, June 27, 2012 5:12 PM
>> > Subject: Re: 2 tners that don't work, how much more can I take!
>> >
>> >
>> > What connector on the transceiver is the Coax on?
>> > ----- Original Message -----=3D20
>> > From: "Harry Brown" <[log in to unmask]>
>> > To: <[log in to unmask]>
>> > Sent: Wednesday, June 27, 2012 1:57 PM
>> > Subject: Re: 2 tners that don't work, how much more can I take!
>> >
>> >
>> > > Hi Gery,
>> > > Yep, the jumper cable goes from the 570 to the so239 connecter =
>> on =3D
>> > the =3D3D
>> > > antenna tuner that says transmitter, and, the coax for the =
>> antenna =3D
>> > is =3D3D
>> > > connected to the so239 connecter on the antenna tuner that says =
>> coax =3D
>> > 1.
>> > > Trippy
>> > > ----- Original Message -----=3D3D20
>> > > From: Gerry Leary=3D3D20
>> > > To: [log in to unmask]
>> > > Sent: Tuesday, June 26, 2012 11:23 PM
>> > > Subject: Re: 2 tners that don't work, how much more can I take!
>> > >=3D20
>> > >=3D20
>> > > Are you sure that you have the right plug on the transceiver?
>> > > ----- Original Message -----=3D3D20
>> > > From: "Harry Brown" <[log in to unmask]>
>> > > To: <[log in to unmask]>
>> > > Sent: Monday, June 25, 2012 6:05 PM
>> > > Subject: 2 tners that don't work, how much more can I take!
>> > >=3D20
>> > >=3D20
>> > > > Hi all,
>> > > > Well, $176.90, down the drain for the mfj949e.
>> > > > I plug in the antenna into coax 1, and the jumper from the =
>> =3D
>> > Kenwood =3D3D
>> > > 570, =3D3D3D
>> > > > and the other end of the jumper to the transmit port, it's =
>> also =3D
>> > an =3D3D
>> > > so239 =3D3D3D
>> > > > connecter, and folks, I disabled the tuner in the 570, and =
>> =3D
>> > adjusted =3D3D
>> > > for =3D3D3D
>> > > > loudest noise, and there is no loudest noise!
>> > > > So, it's a bad tuner.
>> > > > Then, we have the kenwood kt1, autotuner, and so I tryed =
>> that. I =3D
>> > =3D3D
>> > > plugged =3D3D3D
>> > > > the antenna in to that tuner, and I pluged in the power cable =
>> =3D
>> > that =3D3D
>> > > went =3D3D3D
>> > > > from the kt1 to the radio.
>> > > > Then, I press the tune button on the kt1, and no tuning =
>> noise. =3D
>> > =3D3D
>> > > However, =3D3D3D
>> > > > I then reenabled the autotuner in the radio, and pressed the =
>> tune =3D
>> > =3D3D
>> > > button =3D3D3D
>> > > > on the radio, and the kt1 tuner made a noise, like it's =
>> tuning =3D
>> > it, =3D3D
>> > > but =3D3D3D
>> > > > of course, we know that since the 570 tuner is now enabled, =
>> the =3D
>> > kt1 =3D3D
>> > > is =3D3D3D
>> > > > not gonna tune it.
>> > > > I am so tired, just absolutely sick and tired, this is hell =
>> for =3D
>> > me.
>> > > > Also, Bob, k8lr, I'll call ya tomorrow, or, you can call me, =
>> best =3D
>> > =3D3D
>> > > time =3D3D3D
>> > > > is in the afternoon, between 1240 till 3, and anytime after =
>> 4.
>> > > > I'm looking forward to getting your help with echo link.
>> > > > I just wonder sometimes if I'm never ment to get on hf again.
>> > > > I hope not, I just got the extra and I can't use it now.
>> > > > So much for motivation to get the extra, that was the =
>> motivation, =3D
>> > =3D3D
>> > > just =3D3D3D
>> > > > to use those extra frequencies.
>> > > > Trippy, ac8s
>> >
|
