hi linda:
I didn't quite get the drift of what you were saying.
You said the repeater you can't transmit into has no ctcss tone?  ok, then 
you should have no problem transmitting into it...if it has a ctcss tone, 
simply program that tone to transmit on your wouxun and you'll be in 
business...
if a repeater has no tone, then you don't need any tone to transmit to 
it...the tones are only there to keep the repeater secure from noise and 
intermod, though you only need to program your radio to transmit the tone, 
not receive the tone.
I think Icanworkthisthing.com has the wouxun instruction manual and a cheat 
sheet or two that will explain how you can enter a tx tone on the radio to 
get into the repeater that needs a tone, but that you don't have a tone 
programmed into the radio for...if that makes any sence.
If not, please explain what you meant.

regards
Colin
----- Original Message ----- 
From: "Linda C. Knight" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Saturday, April 21, 2012 5:57 PM
Subject: got the magnet mount


>
>
>
>
> Hi all, now I have the magnet mount antenna.
>
>
>
> I can pick up signals-and I can listen to the particular repeater, but 
> here
> is the thing, I can't transmit. (there  is no ctcss tone on this 
> repeater.)
>
>
>
>
>
> I can receive on my two other repeaters and can transmit. Just on this one
> repeater I can't.
>
>
>
> Any thoughts? The weather is nasty down here today-but tomorrow, I will 
> take
> the mag mount and ht a little away from the building.
>
>
>
> Thanks,
>
>
>
>
>
>
>
> Hugs and 73
>
> Linda C. Knight & shirley
>
> CallSign: kk4hrg
>
> Please note email:
>
> [log in to unmask]
>
>