A serial cable and a USB-serial converter and you should be good then. I
wish I could tell you what's good with USB to serial converters but I find
if you get one with the prolific chip in it and use the latest drivers,
usually have to be downloaded since the driver CD usually doesn't have the
latest but with them downloaded, I find that usually works.
----- Original Message -----
From: "DAN REID" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Thursday, August 16, 2012 7:58 PM
Subject: Re: kenwood ts2000
> That is just fine. It would be for dx clusters and contest purposes any =
> way.
> thanks,
> dan (kb6unc)
> ----- Original Message -----=20
> From: John Miller<mailto:[log in to unmask]>=20
> To: =
> [log in to unmask]<mailto:[log in to unmask]>=20
> Sent: Thursday, August 16, 2012 5:53 PM
> Subject: Re: kenwood ts2000
>
>
> The TS-2000 has the build in TNC but it works on VHF/UHF only.
> ----- Original Message -----=20
> From: "Steve Forst" <[log in to unmask]<mailto:[log in to unmask]>>
> To: =
> <[log in to unmask]<mailto:[log in to unmask]>>
> Sent: Thursday, August 16, 2012 1:44 PM
> Subject: Re: kenwood ts2000
>
>
> > Dan,
> >
> > It's been a while since the 2000 was the main rig in the shack, and =
> I
> > was never a packet guy. To do packet or other sound card stuff, =
> you
> > will need some sort of interface with the radio end going in via =
> the
> > 13 pin acc-2 jack on the rear of the 2000. The other end will go =
> into
> > the computer sound card.
> >
> > There are devices like the Signal link USB which has it's own sound =
> card
> > and connects to the pc via a usb cable There are other devices out
> > there that connect to the pc via serial (different versions of =
> Rascal
> > and Rigblaster). These could be used with a usb to serial adapter. =
> I
> > think in these cases the serial connection is for ptt and there is =
> still
> > connection needed to the sound card.
> >
> > Don't know if this is the sort of info you are looking for, or if I
> > just misunderstood your question.
> >
> > 73, Steve KW3A.
> >
> > On 8/16/2012 1:00 PM, DAN REID wrote:
> >> Greetings,
> >> Has anyone used packet with the ts2000 series radios? If so, is =
> there a =3D
> >> cable that works that involves a usb plug on one end?
> >> thanks,
> >> dan (kb6unc)
> >>
> >>
> >>=20
|