hey trippy:
you'll likely have to get a 50 amp power supply...I haven't seen too many
newer ones that are between 40 and 50...IE, 41.
41 amps is the absolute minimum to run the 480HX.
A 50 amp supply will give you that important little bit of extra that is
always good to have on any power supply.
the thing is, you pay more for the hx version, then you have to dish out a
pretty good chunk of change for the 50 amp supply...and all your getting is
3DB increase in your signal and the potential for allot more stuff.
You can always turn off the internal tuner on the standard ts480 if your
going to use the external manual tuner.
You'll end up spending another $500 or so to be able to run the 200 watt
480.
maybe that's worth it for you, it wouldn't be for me.
Much better to take that $500 and buy a nice 500 watt linear amplifier that
will give you at least a 6DB or greater increase...
just my two cents as usual.
again, running power in an apartment is a recipe for problems.
73
Colin, V A6BKX
----- Original Message -----
From: "Harry Brown" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, July 16, 2012 4:31 PM
Subject: Re: the kenwood ts480HX, I'm in the market!
> Hi Howard,
> Which AES, Milwaukee, or another one.
> Trippy, ac8s
> ----- Original Message -----=20
> From: Howard, W A 9 Y B W=20
> To: [log in to unmask]
> Sent: Saturday, July 14, 2012 5:42 PM
> Subject: Re: the kenwood ts480HX, I'm in the market!
>
>
> Harry,
>
> Amateur Electronic Supply will install options for you, don't know if =
> they=20
> charge.
>
> R and L will also for a fee of $25
>
> I had Amateur Electronics Supply mark the positive lead on the power =
> cable=20
> for me with some electrical tape or a cable tie.
>
> Just explain that you are blind don't demand just ask nicely for these =
>
> little extras.
>
> 73
>
> Howard #3
> W A 9 Y B W
>
> ----- Original Message -----=20
> From: "Harry Brown" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Saturday, July 14, 2012 2:30 PM
> Subject: the kenwood ts480HX, I'm in the market!
>
>
> > Hi all,
> > Well folks, yes, I have been bitten, severely, by the hf bug.
> > Now that my ham friends in my building, are back on hf with the =
> Kenwood =3D
> > 570, I am going to buy an hf rig!
> > I've called ham radio outlet, and they have the kenwood ts480HX, =
> that is =3D
> > the 200 watt rig!
> > I'm wondering about the vgs1 speech board, did I get that name =
> right? =3D
> > Anyway, I don't know how to put the speech board in, so, I wonder if =
> ham =3D
> > radio outlet would put it in for me?
> > Or, is it something a blind ham can do?
> > I bet it is, but folks, I don't want to ruin a new radio!
> > So, I'm all ears!
> > 73,
> > Trippy, ac8s, who can't wait to get his own hf station on the air!
>
|