BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG
Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: End Fed Zep Antenna
From:
Gerry Leary <[log in to unmask]>
Reply To:
For blind ham radio operators <[log in to unmask]>
Date:
Tue, 3 Jul 2012 18:56:21 -0600
Content-Type:
text/plain
Parts/Attachments:
text/plain (87 lines) 
I do it with mine.  It works really well.  I just push the center button in 
until it beeps.  Then I either use the tune mode or RTTY with the mike 
button pushed to get the lowest tone which is the best signal.
----- Original Message ----- 
From: "Tom Behler" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, July 03, 2012 4:13 PM
Subject: Re: End Fed Zep Antenna


>    I thought of that, and could maybe do it with the TW1, but the length 
> of
> the screw-driver is what you vary to match it with frequency, so I don't
> know how hard or easy that would be.
>
> May give it a try, though.
>
> 73 from Tom Behler: KB8TYJ
>
> ----- Original Message ----- 
> From: "Gerry Leary" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Tuesday, July 03, 2012 7:58 AM
> Subject: Re: End Fed Zep Antenna
>
>
>> Hey Tom, What about using a tuning aid that changes tone with output?
>> Then
>> you could tune your screwdriver for the highest or lowest tone which 
>> would
>> also give you a good SWR?
>> ----- Original Message ----- 
>> From: "Tom Behler" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Monday, July 02, 2012 8:45 PM
>> Subject: Re: End Fed Zep Antenna
>>
>>
>>>    Thanks, Pat.
>>>
>>> I'm going to continue trying to see what I can do out at the RV site. 
>>> My
>>> problem is that there are just not many trees around, and they are all 
>>> in
>>> the wrong locations.
>>>
>>> 73 from Tom Behler:  KB8TYJ
>>>
>>>
>>> ----- Original Message ----- 
>>> From: "Tom Behler" <[log in to unmask]>
>>> To: "For blind ham radio operators" <[log in to unmask]>
>>> Sent: Monday, July 02, 2012 10:38 PM
>>> Subject: Re: End Fed Zep Antenna
>>>
>>>
>>>>    Thanks, Pat.
>>>>
>>>> I'm going to continue trying to see what I can do out at the RV site.
>>>> My
>>>> problem is that there are just not many trees around, and they are all
>>>> in
>>>> the wrong locations.
>>>>
>>>> 73 from Tom Behler:  KB8TYJ
>>>>
>>>> ----- Original Message ----- 
>>>> From: "Pat Byrne" <[log in to unmask]>
>>>> To: <[log in to unmask]>
>>>> Sent: Monday, July 02, 2012 8:48 PM
>>>> Subject: Re: End Fed Zep Antenna
>>>>
>>>>
>>>>> Not to turn this into a G5RV "it's wonderful" session but I had one
>>>>> 45 feet up at the center, configured as an inverted "V" and it was a
>>>>> wonderful antennna.  France and Australia on 40 with 100 watts.  My
>>>>> next location it was a bum installation and the antenna never did
>>>>> particularly well.  And now I have the W5GI Mystery Antenna, a
>>>>> modified G5RV at 35 or so feet and I am very well pleased with its
>>>>> performance.
>>>>> So Tom, you could do a whole lot worse if you can get up in the air a
>>>>> bit.
>>>>> Good luck.
>>>>> Pat, K9JAUAt 05:58 AM 7/2/2012, you wrote:
>>>>>
>>

ATOM RSS1 RSS2