Mike:
That's exactly what I'm thinking too regarding CW.
I am not sure a 10-amp fuse would be what I want for that mode.
Will check the locations you suggest.
Perhaps 12-amp fuses aren't as uncommon as I think.
Tom Behler: KB8TYJ
----- Original Message -----
From: "Mike Duke, K5XU" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Sunday, May 20, 2012 9:15 PM
Subject: source for 12-amp round AGC fuses
> Try auto parts stores, Wall-Mart, and Radio Shack.
>
> The 10 amp size will probably work okay for SSB, but may not work for
> CW operation where the power output and current drain are higher
> overall.
>
> ----- Original Message -----
> From: "Tom Behler" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Sunday, May 20, 2012 7:49 PM
> Subject: need source for 12-amp round AGC fuses
>
>
> Hi, again, everyone.
>
> This week-end, I put the Tentech Scout that I bought from the recent
> estate
> sale on the air. Made a 20-meter SSB contact to a special event
> station in
> Long Island New York. He gave me a 5 by 7, which isn't bad
> considering the
> maximum output power for the Scout is 50 watts.
>
> Anyway, in looking over the Scout, I notice that it requires a 12-amp
> round
> AGC fuse in the positive lead of the DC power cord. I have 10 and
> 15-amp
> fuses here, but no 12-ampers, which I believe will be hard to come by.
>
> I certainly wouldn't want to put a 15-amp fuse in there, but could go
> with a
> 10-amper, if needed at least in a pinch.
>
> If anyone knows of a good source of 12-amp AGC round fuses, please let
> me
> know.
>
> 73 from Tom Behler: KB8TYJ
>
|