BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Scott Howell <[log in to unmask]>
Reply To:
For blind ham radio operators <[log in to unmask]>
Date:
Tue, 17 Apr 2012 19:43:06 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (35 lines)
TOm,

The rig is no longer being made, but it is a fine rig. It actually has a very nice receiver, but as you likely have figured out, there is no accessibility options for this rig. I do not recall all of the modules that were available, so cannot recall if it could play on all possible bands. WEll of course 60 meters is not likely. :)
Tentec may have some manuals, but for those interested it is as I recall a little larger than a Kenwood TMV7A. I believe the controls were very basic and the band modules fed in on the left side of the display. I'll be curious what this rig will be sold for. Oh I also believe the Scout had the SCAF filter (if I recall the name correctly) which was a single knob that went from a pretty wide open receive to quite narrow.

On Apr 17, 2012, at 7:26 PM, Tom Behler wrote:

> Hello, everyone.
> 
> Well, as many of you know, I have been working with the XYL of one of our 
> local club members, who has recently become a silent key.
> 
> I'm helping her sort through his equipment, after which time, we'll figure 
> out the best way to find new homes for the various rigs.
> 
> One rig that the silent key had is called a Tentec Scout.
> 
> This is a little HF rig, that has small modules that you plug in for 
> whichever band you want to operate at any one point in time.
> 
> I know a little about this rig, because I remember it being used regularly 
> at our club field days back in the late 1990's and early 2000's.
> 
> However, I can't find any information about the rig on the Tentec web site.
> 
> Does anyone know where I might go to get more info about the rig?
> 
> A manual or other piece of documentation would certainly be helpful.
> 
> I will call Tentec at some point to see what they can do, but I thought I'd 
> ask here in case  anyone already had some info on the rig that they could 
> share.
> 
> Thanks, and 73 from Tom Behler: KB8TYJ

ATOM RSS1 RSS2