Jed:
I'll send the re-set instructions to the private address that is listed for
you on this e-mail.
Let me know if it comes through.
Also, be sure to hit the cancel key, in case you inadvertently activated a
rig function that you didn't intend.
73 from Tom Behler: KB8TYJ
----- Original Message -----
From: "Jed Barton" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, January 02, 2012 9:08 PM
Subject: Re: kenwood ts590 won't tune on 20 meters
> how do you do a partial reset?
> nope split is not on
>
>
> -----Original Message-----
> From: For blind ham radio operators [mailto:[log in to unmask]]
> On Behalf Of Tom Behler
> Sent: Monday, January 02, 2012 8:50 PM
> To: [log in to unmask]
> Subject: Re: kenwood ts590 won't tune on 20 meters
>
> Jed:
>
> Are you saying that it gives you a short beep, rather than the CW "A"
> which
> indicates that tuning has occurred?
>
> If so, you probably do have a split or something turned on.
>
> To doublecheck to see if the split is on, press the second button from the
> top on the first column of buttons immediately to the right of the tuning
> knob.
>
> If it reads your frequency, preceded by an "S", then you know the split is
> on.
>
> The other thing you can do is hit the "cancel" button, which is equivalent
> to the "star" on the number pad. It's just to the left of the "0" key.
>
> Otherwise, I've never heard anything like this before. As a last resort,
> you might want to do a partial or VFO re-set.
>
> 73 from Tom Behler: KB8TYJ
>
> ----- Original Message -----
> From: "Jed Barton" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Monday, January 02, 2012 6:47 PM
> Subject: kenwood ts590 won't tune on 20 meters
>
>
>> Hey guys,
>> Trying to figure out if i did something wrong with my ts590.
>> My tuner will not tune on 20 at all. When i hold in the tuner buttonit
>> does
>> a quick quarter second long beep, and that's all.
>> I have no idea what to do.
>> It worked fine the other day, but i'm wondering if i did something wrong,
>> like turned on a split or something.
>> Any ideas?
>>
>> Thanks,
>> Jed
>>
>
|
