Steve:
What's the "drive output" you are referring to on the TS590?
I have never accessed it.
The only thing I have done so far is cycled the meter through its various
options, but never gave the button a long press for the drive output.
Just curious.
73 from Tom Behler: KB8TYJ
----- Original Message -----
From: "Steve Forst" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Sunday, October 02, 2011 8:17 AM
Subject: Re: SWR with TS590S
> No, to the left of the pf b key is the meter/drv key. Single presses
> will cycle the meter through it's various options, and a long press
> will activate
> the drive output. (Don't do that unless you have something connected to
> the drive output on the rear).
>
> 73, Steve KW3A
>
>
> On 10/1/2011 11:21 PM, Jed Barton wrote:
>> what key are you talking about next to the pfb key?
>> that's the upper and lower sideband key?
>>
>> -----Original Message-----
>> From: For blind ham radio operators
>> [mailto:[log in to unmask]]
>> On Behalf Of Steve Forst
>> Sent: Saturday, October 01, 2011 5:17 PM
>> To: [log in to unmask]
>> Subject: Re: SWR with TS590S
>>
>> I don't think it matters, but I set mine to the pf key under the
>> display,
>> which I think is the pf B key (menu 80). Be sure the tx monitor is not
>> on
>> or it will not speak. Don't know if any other
>> settings will disable it. Use the key next to the pf B key to toggle
>> the meter. You also need to keep the ptt applied until the message
>> finishes.
>> If you let up on the ptt, it will stop speaking.
>>
>> 73, Steve KW3A
>>
>>
>> On 10/1/2011 12:54 PM, Jed Barton wrote:
>>> i assigned it to 202, i did it with the first pf key.
>>> I pressed it when i was transmitting but heard nothing, any thoughts?
>>>
>>> -----Original Message-----
>>> From: For blind ham radio operators
>>> [mailto:[log in to unmask]]
>>> On Behalf Of Steve Forst
>>> Sent: Saturday, October 01, 2011 8:25 AM
>>> To: [log in to unmask]
>>> Subject: Re: SWR with TS590S
>>>
>>> Set one of your pf keys (menu 79 or 80) to 202. Press and hold the pf
>>> key while transmitting. Be sure the TX monitor is off or it won't
>>> speak. Use the drive key ( the one that screwed you up before) to
>>> toggle between meter settings: swr, alc, and compression if running
>>> compression.
>>>
>>> 73, Steve KW3A
>>>
>>> On 10/1/2011 3:04 AM, Curtis Delzer wrote:
>>>> by the way, guys, how do we get the ts590S to speak the swr? that
>>>> one went right by me.
>>>> thanks!
>>>>
>>>> Curt
>>>>
>>>> W B 6 H E F
>>>>
>>>>
>>>>
>>>
>>>
>>>
>>
>>
>>
>
|