Hello, all.

Well, I'm happy to report tonight that my friend and I finally got my TS590 
to work with the ARCP590 software and the virtual USB comport driver.

The key was changing the  Jaws utility so that it now works through the on 
board sound card in the laptop.  The other challenge, of course, was to get 
the ports to match up.  For some strange reason, we got things to work when 
we configured the USB com port driver and the ARCP590 software for port 10.

There is one small problem my friend noticed, which doesn't matter to me, 
but which I thought some of you might have some thoughts about.

He says that the bottoms of the numbers on the display screen are slightly 
cut off.  In other words, you can read them, but they are cut off at the 
bottom.  Does anyone know of a menu setting to deal with that?

Finally, I have one additional bit of good news!  We installed the N3FJP 
NorthAmericanQSO Party logging software, and got it to work with my usb to 
serial adapter and CW interface, so now I know the N3FJP software can work 
with my set-up as well.

I still have some tweaking to do, but we have made great progress in the 
last 24 hours.

I want to take a moment here  to sincerely thank all of you for your 
attention to my recent computer and rig interface woes.  You all were very 
patient, and gave me so many great suggestions.

I can only hope that I am as helpful to others as you have been to me.

This is a truly great list, and I appreciate it every day!

73 from Tom Behler:  KB8TYJ