Curt, the third button to the right of the tuning knob, the second row down 
from the top.  push it it will say a, push again b, hold it down it puts 
both vfos on same qrg.  73
Ed   K7UC

--------------------------------------------------
From: "Curtis Delzer" <[log in to unmask]>
Sent: Wednesday, October 19, 2011 2:37 PM
To: <[log in to unmask]>
Subject: Re: TS590 menus A and B, and carrier adjustment.

> I thought so, in fact, I wonder why there is a carrier adjustment at
> all in SSB. :) Now, my only question is where is this "a/b button you
> refer too? thank you!
>
>
> Curt
>
> W B 6 H E F
>
>
> At 10:25 AM 10/19/2011, you wrote:
>>Curt,
>>
>>The carrier level adjustment applies to AM, not SSB.  Regarding the menus,
>>you switch from Menu A to Menu B by pressing the A/B button when inside 
>>the
>>menus.  The radio beeps once when the A menu is selected, and twice when 
>>the
>>B menu is selected.
>>
>>Steve
>>
>>----- Original Message -----
>>From: "Curtis Delzer" <[log in to unmask]>
>>To: <[log in to unmask]>
>>Sent: Wednesday, October 19, 2011 10:22
>>Subject: TS590 menus A and B, and carrier adjustment.
>>
>>
>> > Hi all.  I have two confusing issues.  On SSB there is a "carrier"
>> > adjustment. In the old days it seems to me you want the carrier
>> > adjustment as low as it can be made on SSB, so it should be zero, but
>> > mine, coming out of the factory, or at default adjustment was 50
>> > percent. Why, and where should it be?
>> > My other question has to do with the menus. How do we know as blind
>> > ops which menu we are using, A, or B?  And, how do we access them
>> > from the front panel of the rig.  I know how to use the ARCP-590
>> > software to switch from one or the other of the menus, but I don't
>> > know from which I am either operating or even in the ARCP-590
>> > software which I am accessing when making changes, just that I am
>> > accessing or changing the other.
>> > Thanks!
>> >
>> > Curt
>> >
>> > W B 6 H E F
>> >