Content-Transfer-Encoding: |
7bit |
Sender: |
|
Subject: |
|
From: |
|
Date: |
Thu, 19 Feb 1998 20:39:30 -0800 |
Content-Type: |
text/plain; charset="iso-8859-1" |
MIME-Version: |
1.0 |
Reply-To: |
|
Parts/Attachments: |
|
|
Thank you to everyone that responded. I think I found the problem: a bad
video card. I had an older PCI one meg card in a drawer, so I put it in the
slot... worked like a charm... I am going to return the Virge DX and get
another one...
>>boot up. I fiddled with it and took the card out and put it back... it
>>worked... then I installed the sound card.. and the video blacked out
>again..
>>
>>F Smith
>
>
>This sounds like a bad mechanical connection (as opposed to a software
>problem).
>(Because the card worked after you took it out and put it back. Also, since
>the
>monitor did not respond on boot-up, you never got past the bios to the os.)
>
>You can try cleaning the contacts with pure (99%) isopropyl alcohol; you can
>check the
>cables for bad or bent pins; generally check everything you can. If you are
>fortunate,
>you might fix the problem. It could be a bad solder joint or broken
>connection on the
>mb or video card, in which case you may be out of luck.
>
>As a desperation measure, before throwing the mb or video card away,
>you might try to re-solder the connections. I have never, however,
>heard anyone in this newsgroup say they had any luck doing that.
>
>HTH,
>
>Dean Kukral
>Dept. of Mathematics and Statistics
>Wichita State University
>[log in to unmask]
|
|
|