Subject: | |
From: | |
Reply To: | |
Date: | Fri, 9 Sep 2011 22:21:43 -0600 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Good for you tom.
----- Original Message -----
From: "Tom Behler" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Friday, September 09, 2011 7:56 PM
Subject: Wheeeeeeeeeeeew! We did it!
> Hello, all.
>
> Well, I'm happy to report tonight that my friend and I finally got my
> TS590
> to work with the ARCP590 software and the virtual USB comport driver.
>
> The key was changing the Jaws utility so that it now works through the on
> board sound card in the laptop. The other challenge, of course, was to
> get
> the ports to match up. For some strange reason, we got things to work
> when
> we configured the USB com port driver and the ARCP590 software for port
> 10.
>
> There is one small problem my friend noticed, which doesn't matter to me,
> but which I thought some of you might have some thoughts about.
>
> He says that the bottoms of the numbers on the display screen are slightly
> cut off. In other words, you can read them, but they are cut off at the
> bottom. Does anyone know of a menu setting to deal with that?
>
> Finally, I have one additional bit of good news! We installed the N3FJP
> NorthAmericanQSO Party logging software, and got it to work with my usb to
> serial adapter and CW interface, so now I know the N3FJP software can work
> with my set-up as well.
>
> I still have some tweaking to do, but we have made great progress in the
> last 24 hours.
>
> I want to take a moment here to sincerely thank all of you for your
> attention to my recent computer and rig interface woes. You all were very
> patient, and gave me so many great suggestions.
>
> I can only hope that I am as helpful to others as you have been to me.
>
> This is a truly great list, and I appreciate it every day!
>
> 73 from Tom Behler: KB8TYJ
|
|
|