Steve,
Even if there were high voltage on the DC side of the supply, you wouldn't
get a shock from the AC socket because the DC voltage will never be passed
back through the power transformer.
Steve
----- Original Message -----
From: "Steve Forst" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, February 28, 2011 09:19
Subject: Re: RFI Saga continued
> Tom,
>
> This isn't your amp, where a few thousand volts are floating around.
> While you should always be careful messing around with this stuff, look
> at it this way: If you turn off the supply and unplug it from the
> wall, and your hand brushes against the a.c. plug, will you get fried?
> If you are super paranoid, unplug it and measure the voltage at the
> plug, which will be zero, and proceed.
>
> I do think you should tighten this thing up. I'm not sure it is even
> the "official" ground lug. On the inside it is holding a small thingee
> with wires connected to it. I'm not positive, but it may well be
> where the
> third wire of the a.c. line connects to chassis ground.
>
> If it were me, I'd tighten it up and ground to one of the cover screws.
> And since you don't know you're own strength, just tighten good and
> snug, you're not torquing down head bolts on a Mack truck.
>
> 73, Steve KW3A
>
|