Tom,
Since powerpoles are genderless (like Michael Jackson), you can plug the
one that comes from the power supply into the one that goes to the radio
and get the rigrunner out of the mix, to see if that is really your
problem.
73, Steve KW3A
On 2/8/2011 10:08 PM, tom behler wrote:
> Mike.
>
> I just checked my Astron RS35 supply, and there is no grounding bolt as you
> suggest. On the very left-hand back portion of the supply, there are the DC
> power connections at the top, followed by a fuse, and finally, there's the
> AC power cord connection.
>
> When things shut down as I key up, it still sounds to me like the power
> supply is on--in other words, the hum doesn't go away, as I think it would,
> if it had shut down completely. This is why I'm thinking the floating
> ground might have something to do with the rig runner.
>
> But again, I can't be sure.
>
> So, keep on speculating, and before too long, I'll have dozens of things to
> try.
>
> 73 from Tom Behler: KB8TYJ
>
>
> ----- Original Message -----
> From: "Mike Duke, K5XU"<[log in to unmask]>
> Tco: "Tom Behler"<[log in to unmask]>
> Sent: Tuesday, February 08, 2011 8:56 PM
> Subject: Gary's Post Made Me Think Again
>
>
> Some, but not all, of the PS35 Power supplies, have a grounding bolt
> on the back panel near where the AC line cord comes out of the
> cabinet.
>
> If yours has that grounding bolt, run a wire from it over to your
> station ground, or attach a counterpoise to it.
>
> One more thing about a counterpoise, especially one which is indoors.
>
> You don't have to use copper strap or brade for the counterpoise
> wires.
>
> Zip cord type speaker wire from Wall-Mart will work just fine in that
> application. You can use both conductors, or just one, or even pull it
> apart and have two completely separate counterpoises.
>
> It's that mad scientist thing again.
>
>
>
>
>
> Mike Duke, K5XU
> American Council of Blind Radio Amateurs
>
|