No problem Steve. I did read the manual some time ago at LDG's site,
and I'll get a copy there. I didn't remember the manual being specific
as to the numbering of the RCA jacks. What made me question it a bit
was the way they are staggered in pairs. All seems well. The main
thing I want to do with it is to break out the FSK pin on the 480, which
is on the same connector as the amp.
73, Steve KW3A
On 10/19/2010 8:44 PM, Steve Dresser wrote:
> Steve,
>
> You might still smell smoke, depending on what pins you play with. Be
> careful not to use more than one cable at a time, as some of those cables
> share connections. I thought I had a manual around here for that breakout
> box, but I'm not finding it. Maybe I saw it on the LG site, or on W4RT's
> site.
>
> Steve
>
> ----- Original Message -----
> From: "Steve Forst"<[log in to unmask]>
> To:<[log in to unmask]>
> Sent: Tuesday, October 19, 2010 19:13
> Subject: Re: LDG break out box
>
>
>> Tnx Steve. That's kind of what I figured, and it would seem to be
>> obvious, but I'd rather ask first instead of asking later "What's that
>> smoke I smell"?
>>
>> Tnx again, Steve KW3A
>>
>> On 10/19/2010 7:03 PM, Steve Dresser wrote:
>>> Steve,
>>>
>>> Top row goes from pin 1 on the left to 7 on the right. Bottom row starts
>>> with pin 8 on the left and ends with 14 on the right. The actual
>>> function
>>> of each jack is, of course, determined by the pin-out of the device
>>> you're
>>> connected to.
>>>
>>> Steve
>>>
>>> ----- Original Message -----
>>> From: "Steve Forst"<[log in to unmask]>
>>> To:<[log in to unmask]>
>>> Sent: Tuesday, October 19, 2010 18:47
>>> Subject: LDG break out box
>>>
>>>
>>>> Just picked up one of the LDG break-out boxes (RCA-14), which has DIN
>>>> jacks on the front, and turns them into RCA jacks coming out the rear.
>>>> Anyone know the numbering sequence of the rca jacks on the rear?
>>>>
>>>>
>>>> Tnx, Steve KW3A
>>>>
>>
|