Subject: | |
From: | |
Reply To: | |
Date: | Sat, 5 Feb 2011 20:08:19 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Butch:
My understanding is that it is the NR key--as in Noise Reduction.
It's the button at the 9 o'clock position in the little set of four buttons
shaped like a cross just to the right of the main key pad.
I could be wrong, though.
73 from Tom Behler: KB8TYJ
----- Original Message -----
From: "Butch Bussen" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Saturday, February 05, 2011 7:40 PM
Subject: Re: TS480 firmware update continued
Which key are you calling the m r key? second from the bottom of the
group of four? I can't get mine to do anything but go into receive.
On
Fri, 4 Feb 2011, Steve Dresser wrote:
> Tom,
>
> Depending on how that foot switch is hooked into the circuit, you may have
> to use the actual PTT button on the mic. You may have just been keying
> the
> transmitter, which might account for why there was no speech.
>
> Steve
>
> ----- Original Message -----
> From: "tom behler" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Friday, February 04, 2011 18:45
> Subject: TS480 firmware update continued
>
>
>> Hi, all.
>>
>> I tried to find out my firmware version on my home shack TS480, but did
>> not
>> get any voice read-out from the VGS1.
>>
>> Here's what I did:
>>
>> I used my Heil footswitch to activate the PTT on the mic, while
>> simultaneously pressing the power on key and the NR key on the radio
>> control
>> head. The rig kind of turned on, and got silent, as if there may have
>> been
>> something on the screen, but I got no voice read-out.
>>
>> Am I doing something wrong?
>>
>> 73 from Tom Behler: KB8TYJ
>>
>
>
|
|
|