Matt,
The offset is whatever you program it to be by selecting the appropriate
radio button in the software. Automatic offset only applies when you enter
a frequency via the radio's keyboard.
Steve
----- Original Message -----
From: "Matthew Chao" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, February 02, 2011 14:51
Subject: Re: Repeater Offsets on 2 Meters
> Hi, John! Thanks for the help. Now my question is: When
> programming using the MCP software for the TH-F6A, does the offset
> work automatically even though the radio button may be plus or minus,
> and even though in one of the menus automatic repeater offset is
> enabled? Thanks.--Matt, N1IBB.
>
> At 02:36 PM 2/2/2011, you wrote:
>>aaaaahhhhh, OK, on 440 really it's plus until you can't go plus anymore
>>and
>>still be in band, so anything form 444.95 on down is plus, above that is
>>minus
>>----- Original Message -----
>>From: "Matthew Chao" <[log in to unmask]>
>>To: <[log in to unmask]>
>>Sent: Wednesday, February 02, 2011 1:54 PM
>>Subject: Re: Repeater Offsets on 2 Meters
>>
>>
>> > Hi, John! Am using the MCP program to input freqs. So, even though
>> > the tab will say "simplex" or "plus" the program will set this
>> > automatically. Also, what about the offsets for 440? Thanks in
>> > advance.--Matt.
>> >
>> > P.S. It's been a while since I've been on the radio, so a little
>> > rusty on procedures.
>> >
>> > At 01:37 PM 2/2/2011, you wrote:
>> >>plus is above 147, minus is below but the th-f6A should do it by itself
>> >>----- Original Message -----
>> >>From: "Matthew Chao" <[log in to unmask]>
>> >>To: <[log in to unmask]>
>> >>Sent: Wednesday, February 02, 2011 1:14 PM
>> >>Subject: Repeater Offsets on 2 Meters
>> >>
>> >>
>> >> > Hi, Folks! Am programming my TH-F6a before i go on a trip this
>> >> > weekend. I'm programming in some 2-meter freqs, and can't remember
>> >> > at what point the tx offsets change from a minus shift to a
>> >> > plus. Could someone please refresh my memory? Tnx.--Matt, N1IBB.
>> >>
>> >>__________ Information from ESET Smart Security, version of virus
>> >>signature database 5841 (20110202) __________
>> >>
>> >>The message was checked by ESET Smart Security.
>> >>
>> >>http://www.eset.com
>>
>>__________ Information from ESET Smart Security, version of virus
>>signature database 5841 (20110202) __________
>>
>>The message was checked by ESET Smart Security.
>>
>>http://www.eset.com
>
|
