Not sure what legacy tool you are talking about. The only thing I saw
wanted e-mail street address and phone number, like they wanted me to
buy something. I must be missing something somewhere.
73
Butch Bussen
wa0vjr
open Node 3148
Las Vegas
On Sat, 9 Oct 2010,
John Miller wrote:
> same error for me but the file name is different, it's vsprint7.ocx. See if
> that site's legacy tool helps you though. It very well may.
> ----- Original Message -----
> From: "Butch Bussen" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Saturday, October 09, 2010 4:21 PM
> Subject: Re: ICT90A programming software?
>
>
>> THanks. I looked at that page and didn't see a reference to the file I
>> ned. My program says runtime error 339 comctrl32.ocx or one of its
>> dependencies is missing. Am I missing something obvious, or are you
>> guys getting a different error?
>> 73
>> Butch Bussen
>> wa0vjr
>> open Node 3148
>> Las Vegas
>>
>>
>> On Sat, 9 Oct 2010, John Miller wrote:
>>
>>> I found the fix, you have to replace the VSPRINT.OCX file, and one other,
>>> found together on the website I'll post at the end of this message, once
>>> you
>>> download these 2 files, put them in your c:\windows\system32 folder, or
>>> equivelent, as specified by the instructions on the web site, I just did
>>> this myself and the program works fine now. The site is:
>>> http://www.legacyfamilytree.com/helpDLL-OCXerrors.asp
>>> ----- Original Message -----
>>> From: "colin McDonald" <[log in to unmask]>
>>> To: <[log in to unmask]>
>>> Sent: Saturday, October 09, 2010 2:40 AM
>>> Subject: Re: ICT90A programming software?
>>>
>>>
>>>> i've got hundreds.
>>>> no idea which one to even look at...you have to look up each individual
>>>> update up on the microsoft website, and even then, it doesn't always
>>>> clearly
>>>> tell you the date it was issued.
>>>> frustrating.
>>>> I did a google on the runtime 339 error, and all I found was
>>>> recommendations
>>>> for reg cleaners that you have to pay for that will solve all your
>>>> computer
>>>> ails, and even pour you a tall glass of your favorite beer while your
>>>> waiting for the regb clean to finish.
>>>> no doubt they'll also cook dinner, do the laundry and other adult
>>>> related
>>>> tasks at the same time.
>>>> anyway, john, if you can find or remember something about the update you
>>>> removed, if not the number, than perhaps what it was for or what
>>>> particular
>>>> issue it addressed?
>>>> I don't really want to try and do a system restore to over a year ago.
>>>> probably don't even have a restore point set for that far back.
>>>> I can still program the radio easily enough, but the programming
>>>> software
>>>> is
>>>> nice to use if one has it.
>>>> BTW, the OPC478 icom programming cable doesn't happen to work with the
>>>> th
>>>> F6A does it?
>>>> 73
>>>> Colin, V A6BKX
>>>> ----- Original Message -----
>>>> From: "Butch Bussen" <[log in to unmask]>
>>>> To: <[log in to unmask]>
>>>> Sent: Friday, October 08, 2010 11:15 PM
>>>> Subject: Re: ICT90A programming software?
>>>>
>>>>
>>>>> If you find out what update to uninstall, let me know.
>>>>> THanks.
>>>>> 73
>>>>> Butch Bussen
>>>>> wa0vjr
>>>>> open Node 3148
>>>>> Las Vegas
>>>>>
>>>>>
>>>>> On Fri, 8 Oct
>>>>> 2010, colin McDonald wrote:
>>>>>
>>>>>> hmmm, i'll give that a shot...hopefully I can uninstall the particular
>>>>>> update without compremising all the subsequent updates.
>>>>>> It's odd Icom or someone hasn't written an update patch for that
>>>>>> software...guess since the IC T90 is no longer in production, they
>>>>>> could
>>>>>> care less.
>>>>>> i'm happy I got the HT working again though, I've missed that little
>>>>>> guy.
>>>>>> 73
>>>>>> Colin, V A6BKX
>>>>>> ----- Original Message -----
>>>>>> From: "John Miller" <[log in to unmask]>
>>>>>> To: <[log in to unmask]>
>>>>>> Sent: Friday, October 08, 2010 12:29 PM
>>>>>> Subject: Re: ICT90A programming software?
>>>>>>
>>>>>>
>>>>>>> that's caused by a windows update, it happened to all my computers aw
>>>>>>> well.
>>>>>>> ----- Original Message -----
>>>>>>> From: "colin McDonald" <[log in to unmask]>
>>>>>>> To: <[log in to unmask]>
>>>>>>> Sent: Friday, October 08, 2010 1:39 PM
>>>>>>> Subject: ICT90A programming software?
>>>>>>>
>>>>>>>
>>>>>>>> Hey All:
>>>>>>>> well, I got my IC T90A up and running again...had to pull out the
>>>>>>>> little
>>>>>>>> circuit board that is for over charge protection and voltage
>>>>>>>> regulation
>>>>>>>> out
>>>>>>>> of the battery case, and all is well now...at least it works until I
>>>>>>>> can
>>>>>>>> get
>>>>>>>> a new battery.
>>>>>>>> So, i went to reprogram my IC T90A using the cst90a software and
>>>>>>>> OPC478
>>>>>>>> cable I got with the radio originally, and at some point in the last
>>>>>>>> year
>>>>>>>> and a half, the programming software on the computer has become
>>>>>>>> corrupted.
>>>>>>>> When I try to open the CST90 software, i get a "Run-time error 339,
>>>>>>>> VSPRINT7.OCX" is invalid or the file is missing.
>>>>>>>> Not sure how this happened as I haven't removed anything to do with
>>>>>>>> the
>>>>>>>> programming software.
>>>>>>>> It was working last time I used it like I said, about a year and
>>>>>>>> ahalf
>>>>>>>> ago.
>>>>>>>> So, I did a google search to see if I could redownload the software,
>>>>>>>> but
>>>>>>>> apparently it's only availible on CD from ICom or at least, from one
>>>>>>>> of
>>>>>>>> icoms dealers.
>>>>>>>> So, I have a registered copy of the software, the right cable, but I
>>>>>>>> can't
>>>>>>>> program the radio.
>>>>>>>> I don't know where my original programming cd is after 3 moves, and
>>>>>>>> I
>>>>>>>> highly
>>>>>>>> doubt I can just call and ask for another copy as I probably didn't
>>>>>>>> bother
>>>>>>>> to register the thing originally.
>>>>>>>> So, i'm wondering if anyone has the cst90 software that they can zip
>>>>>>>> up
>>>>>>>> and
>>>>>>>> send me so I can see if i can get this thing going again.
>>>>>>>> I can always reprogram manually, not a huge deal, but I would like
>>>>>>>> to
>>>>>>>> use
>>>>>>>> the software as I have the right cable etc.
>>>>>>>> it's already been perchased for my use, so I'm not requesting to
>>>>>>>> pirate
>>>>>>>> the
>>>>>>>> software, I just need a uncorrupted version is all.
>>>>>>>> 73
>>>>>>>> Colin, V A6BKX
>>>>>>
>>>>>>
>>>
>>>
>
>
|
