I know the clip on my SMC-32 is very very loose and still going, remember my
internal speaker is not working anymore so I've had that mic on that radio
for 2 years now and that clip is so loose I'm waiting for it to come off any
day but so far so good. I have an SMC-34 I got in a deal with something else
I can use if that happens, just switch it between the 2 radios, I don't care
for speaker mics anyway really but sometimes they do come in handy. I
remember the old radio shack speaker mic I had the clip came off the back of
that one but that was a metal clip so I just put a pop rivet through it and
a backer on the inside of the mic and it worked fine until I sold it, you
couldn't even tell really, not sure I'd do that with these plastic clips but
if it does give you might try it if you have anything like that sitting
around that might hold it.
----- Original Message -----
From: "tom behler" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, October 04, 2010 10:59 AM
Subject: Re: Question on THF6A SMC33 speaker mic
> John:
>
> Well, that's really disconcerting, considering what I paid for the mic
> when
> I bought it.
>
> It's a good mic, but I'm just afraid that clip is going to come off, and
> then I'll have no way to attach it to my belt.
>
> Kind of defeats the purpose of the mic, in some ways.
>
> 73 from Tom Behler: KB8TYJ
>
> ----- Original Message -----
> From: "John Miller" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Monday, October 04, 2010 9:35 AM
> Subject: Re: Question on THF6A SMC33 speaker mic
>
>
> There is nothing outside, I'm not even sure there's a screw inside but you
> can look,I think it's just a plastic snap on thing or plastic rivet or
> something like that but you can take it apart and look, I know there's
> nothing on the outside of either speaker mic I have for that radio.
> ----- Original Message -----
> From: "tom behler" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Monday, October 04, 2010 9:09 AM
> Subject: Question on THF6A SMC33 speaker mic
>
>
>> Hi, all.
>>
>> Recently, and especially after my crop walk communications net yesterday,
>> I
>> have noticed that the clip on the back of the SMC33 mic that I use for my
>> THF6A HT has become very loose.
>>
>> I can't seem to find a screw anywhere to tighten the clip back up.
>> I asked the XYL, and she can't seem to find one either after careful
>> visual
>> inspection.
>>
>> Has anyone had this problem, and if so, how did you solve it?
>>
>> I sure hope you don't have to take the mic apart to get to any tightening
>> screw!
>>
>> 73 from Tom Behler: KB8TYJ
|