Curt,
It's the third button from the left in the second row down from the bottom
of the display, just to the right of the tuning knob.
Steve
----- Original Message -----
From: "Curtis Delzer" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, October 19, 2011 16:37
Subject: Re: TS590 menus A and B, and carrier adjustment.
>I thought so, in fact, I wonder why there is a carrier adjustment at
> all in SSB. :) Now, my only question is where is this "a/b button you
> refer too? thank you!
>
>
> Curt
>
> W B 6 H E F
>
>
> At 10:25 AM 10/19/2011, you wrote:
>>Curt,
>>
>>The carrier level adjustment applies to AM, not SSB. Regarding the menus,
>>you switch from Menu A to Menu B by pressing the A/B button when inside
>>the
>>menus. The radio beeps once when the A menu is selected, and twice when
>>the
>>B menu is selected.
>>
>>Steve
>>
>>----- Original Message -----
>>From: "Curtis Delzer" <[log in to unmask]>
>>To: <[log in to unmask]>
>>Sent: Wednesday, October 19, 2011 10:22
>>Subject: TS590 menus A and B, and carrier adjustment.
>>
>>
>> > Hi all. I have two confusing issues. On SSB there is a "carrier"
>> > adjustment. In the old days it seems to me you want the carrier
>> > adjustment as low as it can be made on SSB, so it should be zero, but
>> > mine, coming out of the factory, or at default adjustment was 50
>> > percent. Why, and where should it be?
>> > My other question has to do with the menus. How do we know as blind
>> > ops which menu we are using, A, or B? And, how do we access them
>> > from the front panel of the rig. I know how to use the ARCP-590
>> > software to switch from one or the other of the menus, but I don't
>> > know from which I am either operating or even in the ARCP-590
>> > software which I am accessing when making changes, just that I am
>> > accessing or changing the other.
>> > Thanks!
>> >
>> > Curt
>> >
>> > W B 6 H E F
>> >
>
|