one certainly doesn't need the software to easily program a memory channel
in the TH F6A.
it's 2 button presses beyond entering of the frequency.
and to set a tone it's another two button presses.
73
Colin, V A6BKX
----- Original Message -----
From: "Steve Dresser" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, March 01, 2011 3:26 PM
Subject: Re: thf6a weather channels
> Colin,
>
> I would just use the software, but Daren doesn't have a cable so he has to
> resort to more desperate means.
>
> Steve
>
> ----- Original Message -----
> From: "colin McDonald" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Tuesday, March 01, 2011 16:06
> Subject: Re: thf6a weather channels
>
>
>> why don't you just reprogram the weather freqs into memory?
>> Unless you use scan on your memory channels, but even then, you just need
>> to
>> lockout the weather channel so it doesn't stop on that channel everytime
>> you
>> scan.
>> Seems allot easier than trying to reprogram the weather freqs to where
>> they
>> were originally.
>> 73
>> Colin, V A6BKX
>> ----- Original Message -----
>> From: "Steve Dresser" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Tuesday, March 01, 2011 8:40 AM
>> Subject: Re: thf6a weather channels
>>
>>
>>> Darren,
>>>
>>> I can think of only two ways to get them back, and neither of them are
>>> very
>>> nice. The most obvious way is to do a full reset of the radio, which
>>> will
>>> wipe out all the memories you've saved, but it will restore the factory
>>> defaults. The second way is to start at memory 0, go to VFO mode, press
>>> Function and turn the tuning control one click to the left, which will
>>> put
>>> you into the tenth weather channel memory. Then press Memory to store
>>> the
>>> frequency in that memory. Repeat this procedure, turning the tuning
>>> knob
>>> one click to the left for each memory you want to fill. Like I said,
>>> it's
>>> not pretty, but it's the only way you can do it without using the
>>> computer.
>>>
>>> Steve
>>>
>>> ----- Original Message -----
>>> From: "Darren Tomblin" <[log in to unmask]>
>>> To: <[log in to unmask]>
>>> Sent: Monday, February 28, 2011 00:30
>>> Subject: thf6a weather channels
>>>
>>>
>>>> Hi, I have a question about the weather channels on my thf6a. some how
>>>> =
>>>> they got removed probably when I was saving something to memory. does =
>>>> anyon know how I can get them back. I don't have a way to connect it to
>>>> =
>>>> the computer to do it. thanks in advance. Darren
>>>>
>>
|