what key are you talking about next to the pfb key?
that's the upper and lower sideband key?
-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Steve Forst
Sent: Saturday, October 01, 2011 5:17 PM
To: [log in to unmask]
Subject: Re: SWR with TS590S
I don't think it matters, but I set mine to the pf key under the display,
which I think is the pf B key (menu 80). Be sure the tx monitor is not on
or it will not speak. Don't know if any other
settings will disable it. Use the key next to the pf B key to toggle
the meter. You also need to keep the ptt applied until the message finishes.
If you let up on the ptt, it will stop speaking.
73, Steve KW3A
On 10/1/2011 12:54 PM, Jed Barton wrote:
> i assigned it to 202, i did it with the first pf key.
> I pressed it when i was transmitting but heard nothing, any thoughts?
>
> -----Original Message-----
> From: For blind ham radio operators
> [mailto:[log in to unmask]]
> On Behalf Of Steve Forst
> Sent: Saturday, October 01, 2011 8:25 AM
> To: [log in to unmask]
> Subject: Re: SWR with TS590S
>
> Set one of your pf keys (menu 79 or 80) to 202. Press and hold the pf
> key while transmitting. Be sure the TX monitor is off or it won't
> speak. Use the drive key ( the one that screwed you up before) to
> toggle between meter settings: swr, alc, and compression if running
> compression.
>
> 73, Steve KW3A
>
> On 10/1/2011 3:04 AM, Curtis Delzer wrote:
>> by the way, guys, how do we get the ts590S to speak the swr? that
>> one went right by me.
>> thanks!
>>
>> Curt
>>
>> W B 6 H E F
>>
>>
>>
>
>
>
|