Subject: | |
From: | |
Reply To: | |
Date: | Sat, 27 Aug 2011 01:21:58 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Thanks for this Gale. I am saving this one for sure.
Original message:
> Richard,
> Turn radio on.
> Make sure VOX is on.
> (VOX ON-OFF is number nine on touch-tone pad in upper group of buttons on
> right side of radio.)
> Press SET button and hold until it beeps twice.
> (SET is far right button on third row from bottom of buttons on right side
> of radio.)
> Press UP or DOWN button until you hear long beep.
> (UP and DOWN are the two longer buttons in the bottom row at the
> bottom-right side of radio.)
> Long beep is number 1 in the QUICK-SET Menu.
> Press UP (left longer button) twice more to get to number 3, which is
> VOX-GAIN.
> Speak into microphone and adjust gain by turning MAIN-TUNING control in
> small increments, until you are satisfied.
> Press UP button again to move to number four in the QUICK-SET menu, which is
> VOX-DELAY.
> Speak into microphone and adjust VOX-DELAY by turning MAIN-TUNING control in
> small increments until you are satisfied.
> Press SET button quickly to leave QUICK-SET menu.
> Hope this helps.
> 73,
> Gale
> [log in to unmask]
> ----- Original Message -----
> From: "Richard Wells" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Friday, August 26, 2011 2:31 PM
> Subject: Setting VOX gGain And Delay On IC-718
> Does anyone know of an accessible way to set vox gain and/or delay on
> an IC-718 either through Ham Radio Deluxe 5 or through the radios own
> speech interface using the UT-102? Thanks in advance for any pointers on
> this.
--
Email services provided by the System Access Mobile Network. Visit
www.serotek.com to learn more about accessibility anywhere.
|
|
|