Tnx Doug. The reset solved my problem as well. Sometimes it is just
faster to reset than to spend time trying to figure out what you did
wrong. Of course, if it is a processor glitch, no amount of head
scratching will solve it without a reset.
73, Steve KW3A
On 8/7/2011 2:53 PM, Doug Payne wrote:
> Steve,
>
> I had the same problem with my TS-590s on 17 meters, and this was right out
> of the box. I reset the radio, and that fixed the issue.
>
> --Doug, AC7T
>
> -----Original Message-----
> From: For blind ham radio operators [mailto:[log in to unmask]]
> On Behalf Of Ed Malmgren
> Sent: Saturday, August 06, 2011 3:14 PM
> To: [log in to unmask]
> Subject: Fw: TS-590 puzzlement
>
> Hello Steve. I would not know what happened but I think there occurs a
> glitch once in a while in the rigs. A while back I lost almost all the
> sensitivity on 20 meters and so I had to do a full reset and then all was
> fine so it makes you wonder hi.
> Ed K7UC
>
> --------------------------------------------------
> From: "Steve Forst"<[log in to unmask] NET>
> Sent: Saturday, August 06, 2011 11:32 AM
> To:<[log in to unmask]>
> Subject: TS-590 puzzlement
>
>> Not sure what happened here today with the 590. Found no transmit on 15
>> meters. This was on different antennas or dummy load. Anywhere in the
>> band, any mode. The radio would switch from RX to TX, but no RF out.
>> The TW-1 gave no audio or tone indication for either power or swr.
>> The auto tuner would not respond and only gave a boink. All other
>> bands were fine, 160 through 6 meters.
>>
>> Went into the ARCP-590 software, saved my data to the computer, did a
>> full reset, and 15 meters is alive again. Reloaded the backup I did
>> just prior to the reset, and everything is working fine.
>>
>>
>> Just one of those things? or did I have something set incorrectly?
>>
>> 73, Steve KW3A
>
|