Steve,

I had the same problem with my TS-590s on 17 meters, and this was right out
of the box. I reset the radio, and that fixed the issue.

--Doug, AC7T

-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Ed Malmgren
Sent: Saturday, August 06, 2011 3:14 PM
To: [log in to unmask]
Subject: Fw: TS-590 puzzlement

Hello Steve.   I would not know what happened but I think there occurs a 
glitch once in a while in the rigs.  A while back I lost almost all the
sensitivity on 20 meters and so I had to do a full reset and then all was
fine so it makes you wonder hi.
Ed   K7UC

--------------------------------------------------
From: "Steve Forst" <[log in to unmask]        NET>
Sent: Saturday, August 06, 2011 11:32 AM
To: <[log in to unmask]>
Subject: TS-590 puzzlement

> Not sure what happened here today with the 590.  Found no transmit on 15
> meters.   This was on different antennas or dummy load.  Anywhere in the
> band, any mode.  The radio would switch from RX to TX, but no RF out.
> The TW-1 gave no audio or tone  indication for either power or swr.  
> The auto tuner would not respond and only gave a boink.  All other 
> bands were fine, 160 through 6 meters.
>
> Went into the ARCP-590 software, saved my data to the computer, did a 
> full reset, and 15 meters is alive again.  Reloaded the backup I did 
> just prior to the reset, and everything is working fine.
>
>
> Just one of those things? or did I have something set incorrectly?
>
> 73, Steve KW3A