Steve,

Quite by accident, I discovered that you won't be able to reset the radio if 
you're in VFO B.  Fortunately, you can use this method to see where you are 
because the radio asks for confirmation before doing the reset, so you can 
get out of it without losing settings.

Steve

----- Original Message ----- 
From: "Steve Forst" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, May 11, 2010 11:06
Subject: Re: TS-2000 and split.


> Rick,
>
> That is one of the quirks  of  the 2000, it doesn't tell you what vfo you
> are on. But it really doesn't matter if you rx on vfo "A" and tx on vfo 
> "B"
> or the other way around.   The radio doesn't care.   You can reverse what 
> is
> the rx and the tx vfo by hitting the a/b button when in split mode.  But
> again it doesn't matter which is rx and which is tx.
>
>
> Something that may or may not help you is while in split mode, push and 
> hold
> the TF button.  It is the one just to the right of the menu button and has 
> a
> dimple in the middle.   If you press and hold while in split mode it will
> jump to the TX freq and the voice will announce it.  release it and you go
> back to the RX vfo.  If not in split mode, and you press that button, you
> just get a "boink'.   So it is a good way to see if you have left it in
> split mode when you don't want to be there.
> 73, Steve KW3A
>
>
> ----- Original Message ----- 
> From: "Rick" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Tuesday, May 11, 2010 10:46 AM
> Subject: TS-2000 and split.
>
>
>> Hi list.
>> Could some one please tell me how to do split operations on the TS-2000?
>> If I understand right, you put the receive frequency on VFO a, and the =
>> transmit frequency on VFO B and hit split.
>> But I haven't found A reliable way to tell what VFO I'm on.
>> I haven't played with it much though.
>> Thanks in advance for any help, and 7 3.
>>
>