I called Art at a e s and had him pull a board to confirm, and as he
said yesterday and icom told me as well, there is no level control on
this board. Icom told me to adjust r 2701 on the main board, so now I
need help to find that.
73
Butch Bussen
wa0vjr
open Node 3148
Las Vegas
On Wed, 17 Mar 2010, John Miller wrote:
> the ic-751 is way older that's not the same board as the 718.
> ----- Original Message -----
> From: "Steve" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Wednesday, March 17, 2010 5:19 PM
> Subject: Re: ic-718
>
>
>> On my older Icom 751 which uses the same UT-102, there is a pot adjustment
>> on the synthesizer board.
>>
>> ----- Original Message -----
>> From: "Butch Bussen" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Wednesday, March 17, 2010 2:08 PM
>> Subject: Re: ic-718
>>
>>
>>> Are you sure? I spoke with icom and a e s and both tell me there is no
>>> adjustment on the board. I'm confused, and the speach board is mounted
>>> under the add on digital noise reduction module, so not easy to get at
>>> unless I'm sure.
>>> 73
>>> Butch Bussen
>>> wa0vjr
>>> open Node 3148
>>> Las Vegas
>>>
>>>
>>> On Wed, 17 Mar 2010, Russ Kiehne wrote:
>>>
>>>> The adjustment is on the speech board itself.
>>>> ----- Original Message -----
>>>> From: "tom behler" <[log in to unmask]>
>>>> To: <[log in to unmask]>
>>>> Sent: Tuesday, March 16, 2010 5:55 PM
>>>> Subject: Re: ic-718
>>>>
>>>>
>>>>> Butch:
>>>>>
>>>>> I swear there is an adjustment in one of the menus for UT102 volume.
>>>>>
>>>>> I seem to recall having that problem with mine too, but remember
>>>>> adjusting
>>>>> it. I had to, because it was a rig that I used for Field Day, and
>>>>> often
>>>>> in
>>>>> our motor home, so needed the volume to be a bit higher than usual.
>>>>>
>>>>> 73 from Tom Behler: KB8TYJ
>>>>>
>>>>> ----- Original Message -----
>>>>> From: "Butch Bussen" <[log in to unmask]>
>>>>> To: <[log in to unmask]>
>>>>> Sent: Tuesday, March 16, 2010 5:54 PM
>>>>> Subject: Re: ic-718
>>>>>
>>>>>
>>>>> I did go to a e s and bought the synthesizer and the i-100 tuner. I
>>>>> considred getting the at-100, but they didn't have one in stock and I
>>>>> wasn't sure what the up down manual tuning buttons did and all that, so
>>>>> I
>>>>> figured I'd keep it simple, just one button. On another note, the
>>>>> synthesizer works, but the level seems low. It is fine if you don't
>>>>> have
>>>>> much signal, but it is covered up by the noise unless I turn the rf
>>>>> gain
>>>>> down. Any suggestions? I called a e s and they said no level adjust
>>>>> on
>>>>> the board. I called icom and they are supposed to call me back.
>>>>>
>>>>> Yep, it is a nice little radio, nice for portable or mobile, just a
>>>>> simple
>>>>> little rig.
>>>>> 73
>>>>> Butch Bussen
>>>>> wa0vjr
>>>>> open Node 3148
>>>>> Las Vegas
>>>>
>>>>
>
>
|