Sender: |
|
Date: |
Fri, 29 Oct 2010 18:29:40 -0500 |
Reply-To: |
|
Message-ID: |
<000b01cb77c1$29539c90$6400a8c0@HT> |
Subject: |
|
MIME-Version: |
1.0 |
Content-Transfer-Encoding: |
7bit |
Content-Type: |
text/plain; format=flowed; charset="iso-8859-1";
reply-type=original |
Organization: |
Traxler Enterprises |
From: |
|
Parts/Attachments: |
|
|
Does anyone know the electronics inside these things? I have a powerbraille
80 that has several dots stickig up all the time. I know it's not any kind
of dirty or miss-alinement. The staying up dots work up and down by
pressing just as easily as the ones that are supposed to be up. I suspect a
failing electronic component somewhere in there. Sure would like to not
have to pay the $800 that fs wants to mess it up worse.
The Other Howard, WA9RYF
----- Original Message -----
From: "Lou Kolb" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Friday, October 29, 2010 5:45 PM
Subject: Re: OT braille display
> Pretty sure it's cleaning, Steve. Dots all come up just fine but won't
> retract properly. Not all of them, just the left end which is touched
> more
> than the others. Thanks everyone for your answers. Lou
> ----- Original Message -----
> From: "Steve Dresser" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Friday, October 29, 2010 9:55 AM
> Subject: Re: OT braille display
>
>
>> Lou,
>>
>> If cleaning is really the issue, you can probably use denatured alcohol
>> to
>> do the job. Unfortunately, however, if the display is older, you may
>> also
>> have weak cells, or pins that are out of alignment, which will probably
>> require sending the unit in to be repaired.
>>
>> Steve
>>
>> ----- Original Message -----
>> From: "Lou Kolb" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Friday, October 29, 2010 07:49
>> Subject: OT braille display
>>
>>
>>> Please forgive the off-topic post which, while not dirrectly ham radio
>>> related is at least technical in nature and I'm sure you folks will have
>>> some suggestions. I have both a Braille-lite and a pac-mate which I
>>> rely
>>> on
>>> heavily at work every day. The Displays in both units need cleaning
>>> especially on the left-hand side which is touched most often. I'd like
>>> to
>>> avoid sending them in to FS both because of the cost and the time
>>> involved.
>>> Any ideas on how to clean them without causing harm? Lou WA3MIX
>>>
|
|
|