I did this and still get the same error 339 and file comctl32.ocx
I'm not sure what tool John was talking about. Thanks everyone for your
help.
73
Butch Bussen
wa0vjr
open Node 3148
Las Vegas
On Sat,
9 Oct 2010, colin McDonald wrote:
> the one i was getting was Runtime error 339 VSprint7.OCX.
> I downloaded that one and the second one they recommended as well.
> try it butch and see if the issue disappears.
> if it doesn't, try a google search for the specific file you are getting the
> error on to see if you can download it.
> 73
> Colin, V A6BKX
> ----- Original Message -----
> From: "Butch Bussen" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Saturday, October 09, 2010 2:21 PM
> Subject: Re: ICT90A programming software?
>
>
>> THanks. I looked at that page and didn't see a reference to the file I
>> ned. My program says runtime error 339 comctrl32.ocx or one of its
>> dependencies is missing. Am I missing something obvious, or are you
>> guys getting a different error?
>> 73
>> Butch Bussen
>> wa0vjr
>> open Node 3148
>> Las Vegas
>>
>>
>> On Sat, 9 Oct 2010, John Miller wrote:
>>
>>> I found the fix, you have to replace the VSPRINT.OCX file, and one other,
>>> found together on the website I'll post at the end of this message, once
>>> you
>>> download these 2 files, put them in your c:\windows\system32 folder, or
>>> equivelent, as specified by the instructions on the web site, I just did
>>> this myself and the program works fine now. The site is:
>>> http://www.legacyfamilytree.com/helpDLL-OCXerrors.asp
>>> ----- Original Message -----
>>> From: "colin McDonald" <[log in to unmask]>
>>> To: <[log in to unmask]>
>>> Sent: Saturday, October 09, 2010 2:40 AM
>>> Subject: Re: ICT90A programming software?
>>>
>>>
>>>> i've got hundreds.
>>>> no idea which one to even look at...you have to look up each individual
>>>> update up on the microsoft website, and even then, it doesn't always
>>>> clearly
>>>> tell you the date it was issued.
>>>> frustrating.
>>>> I did a google on the runtime 339 error, and all I found was
>>>> recommendations
>>>> for reg cleaners that you have to pay for that will solve all your
>>>> computer
>>>> ails, and even pour you a tall glass of your favorite beer while your
>>>> waiting for the regb clean to finish.
>>>> no doubt they'll also cook dinner, do the laundry and other adult
>>>> related
>>>> tasks at the same time.
>>>> anyway, john, if you can find or remember something about the update you
>>>> removed, if not the number, than perhaps what it was for or what
>>>> particular
>>>> issue it addressed?
>>>> I don't really want to try and do a system restore to over a year ago.
>>>> probably don't even have a restore point set for that far back.
>>>> I can still program the radio easily enough, but the programming
>>>> software
>>>> is
>>>> nice to use if one has it.
>>>> BTW, the OPC478 icom programming cable doesn't happen to work with the
>>>> th
>>>> F6A does it?
>>>> 73
>>>> Colin, V A6BKX
>>>> ----- Original Message -----
>>>> From: "Butch Bussen" <[log in to unmask]>
>>>> To: <[log in to unmask]>
>>>> Sent: Friday, October 08, 2010 11:15 PM
>>>> Subject: Re: ICT90A programming software?
>>>>
>>>>
>>>>> If you find out what update to uninstall, let me know.
>>>>> THanks.
>>>>> 73
>>>>> Butch Bussen
>>>>> wa0vjr
>>>>> open Node 3148
>>>>> Las Vegas
>>>>>
>>>>>
>>>>> On Fri, 8 Oct
>>>>> 2010, colin McDonald wrote:
>>>>>
>>>>>> hmmm, i'll give that a shot...hopefully I can uninstall the particular
>>>>>> update without compremising all the subsequent updates.
>>>>>> It's odd Icom or someone hasn't written an update patch for that
>>>>>> software...guess since the IC T90 is no longer in production, they
>>>>>> could
>>>>>> care less.
>>>>>> i'm happy I got the HT working again though, I've missed that little
>>>>>> guy.
>>>>>> 73
>>>>>> Colin, V A6BKX
>>>>>> ----- Original Message -----
>>>>>> From: "John Miller" <[log in to unmask]>
>>>>>> To: <[log in to unmask]>
>>>>>> Sent: Friday, October 08, 2010 12:29 PM
>>>>>> Subject: Re: ICT90A programming software?
>>>>>>
>>>>>>
>>>>>>> that's caused by a windows update, it happened to all my computers aw
>>>>>>> well.
>>>>>>> ----- Original Message -----
>>>>>>> From: "colin McDonald" <[log in to unmask]>
>>>>>>> To: <[log in to unmask]>
>>>>>>> Sent: Friday, October 08, 2010 1:39 PM
>>>>>>> Subject: ICT90A programming software?
>>>>>>>
>>>>>>>
>>>>>>>> Hey All:
>>>>>>>> well, I got my IC T90A up and running again...had to pull out the
>>>>>>>> little
>>>>>>>> circuit board that is for over charge protection and voltage
>>>>>>>> regulation
>>>>>>>> out
>>>>>>>> of the battery case, and all is well now...at least it works until I
>>>>>>>> can
>>>>>>>> get
>>>>>>>> a new battery.
>>>>>>>> So, i went to reprogram my IC T90A using the cst90a software and
>>>>>>>> OPC478
>>>>>>>> cable I got with the radio originally, and at some point in the last
>>>>>>>> year
>>>>>>>> and a half, the programming software on the computer has become
>>>>>>>> corrupted.
>>>>>>>> When I try to open the CST90 software, i get a "Run-time error 339,
>>>>>>>> VSPRINT7.OCX" is invalid or the file is missing.
>>>>>>>> Not sure how this happened as I haven't removed anything to do with
>>>>>>>> the
>>>>>>>> programming software.
>>>>>>>> It was working last time I used it like I said, about a year and
>>>>>>>> ahalf
>>>>>>>> ago.
>>>>>>>> So, I did a google search to see if I could redownload the software,
>>>>>>>> but
>>>>>>>> apparently it's only availible on CD from ICom or at least, from one
>>>>>>>> of
>>>>>>>> icoms dealers.
>>>>>>>> So, I have a registered copy of the software, the right cable, but I
>>>>>>>> can't
>>>>>>>> program the radio.
>>>>>>>> I don't know where my original programming cd is after 3 moves, and
>>>>>>>> I
>>>>>>>> highly
>>>>>>>> doubt I can just call and ask for another copy as I probably didn't
>>>>>>>> bother
>>>>>>>> to register the thing originally.
>>>>>>>> So, i'm wondering if anyone has the cst90 software that they can zip
>>>>>>>> up
>>>>>>>> and
>>>>>>>> send me so I can see if i can get this thing going again.
>>>>>>>> I can always reprogram manually, not a huge deal, but I would like
>>>>>>>> to
>>>>>>>> use
>>>>>>>> the software as I have the right cable etc.
>>>>>>>> it's already been perchased for my use, so I'm not requesting to
>>>>>>>> pirate
>>>>>>>> the
>>>>>>>> software, I just need a uncorrupted version is all.
>>>>>>>> 73
>>>>>>>> Colin, V A6BKX
>>>>>>
>>>>>>
>>>
>>>
>
>
|
