Yes Butch, it is a connector  made for the crimper job.  It has a ring which 
slides over the braid, that is where you crimp.  I have had trouble getting 
all the wires on 213 coax in the center pin hole but with the cutters I 
mentioned before it slides in easily.  73  Ed  K7UC
----- Original Message ----- 
From: "Butch Bussen" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Sunday, August 22, 2010 11:05 PM
Subject: Re: connectors


> Do you also use a crimp on connector that works with this?
> 73
> Butch Bussen
> wa0vjr
> open Node 3148
> Las Vegas
>
>
> On Sun, 22 Aug
> 2010, Ed Malmgren wrote:
>
>> Mike, yes the stripper I got from R F Connections strips both R G 8 and 
>> 213
>> and cuts the outer cover and the shield and the insulation between the
>> shield and the center conductor in one operation.  Very slick.  73
>> Ed  K7UC
>> ----- Original Message -----
>> From: "Mike Keithley" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Sunday, August 22, 2010 5:45 PM
>> Subject: Re: connectors
>>
>>
>>> Is there a way to use them to actually strip the outer insulation to 
>>> work
>>> with the brade? I've been looking for a stripping tool for RG8 coax.
>>>
>>> ----- Original Message -----
>>> From: Ed Malmgren <[log in to unmask]>
>>> To: unknown [log in to unmask]
>>> Date: Saturday, Aug 21, 2010 12:22:21
>>> Subject: connectors
>>>
>>>>
>>>>
>>>> Okay Fred, any time.  I can't remember if you purchased coax cutting
>>>> pliers.
>>>> R F connectors sells a pair for eleven bux which sure makes the job
>>>> easier.
>>>> They don't flatten the center conductor.  73  Just thought I would
>>>> mention
>>>> it.  73
>>>> Ed  K7UC
>>
>>