Are you sure? I spoke with icom and a e s and both tell me there is no 
adjustment on the board.  I'm confused, and the speach board is mounted 
under the add on digital noise reduction module, so not easy to get at 
unless I'm sure.
73
Butch Bussen
wa0vjr
open Node 3148
Las Vegas


On Wed, 17 Mar 2010, Russ Kiehne wrote:

> The adjustment is on the speech board itself.
> ----- Original Message -----
> From: "tom behler" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Tuesday, March 16, 2010 5:55 PM
> Subject: Re: ic-718
>
>
>>    Butch:
>>
>> I swear there is an adjustment in one of the menus for UT102 volume.
>>
>> I seem to recall having that problem with mine too, but remember adjusting
>> it.  I had to, because it was a rig that I used for Field Day, and often
>> in
>> our motor home, so needed the volume to be a bit higher than usual.
>>
>> 73 from Tom Behler:  KB8TYJ
>>
>> ----- Original Message -----
>> From: "Butch Bussen" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Tuesday, March 16, 2010 5:54 PM
>> Subject: Re: ic-718
>>
>>
>> I did go to a e s and bought the synthesizer and the i-100 tuner.  I
>> considred getting the at-100, but they didn't have one in stock and I
>> wasn't sure what the up down manual tuning buttons did and all that, so I
>> figured I'd keep it simple, just one button.  On another note, the
>> synthesizer works, but the level seems low.  It is fine if you don't have
>> much signal, but it is covered up by the noise unless I turn the rf gain
>> down.  Any suggestions?  I called a e s and they said no level adjust on
>> the board.  I called icom and they are supposed to call me back.
>>
>> Yep, it is a nice little radio, nice for portable or mobile, just a simple
>> little rig.
>> 73
>> Butch Bussen
>> wa0vjr
>> open Node 3148
>> Las Vegas
>
>