Rick,
Here is how I do it. There may be a better way, but this works.
In vfo mode, put in your receive frequency. Switch to the other vfo and put
in your transmit frequency. Go back to the first vfo and hit the split
button. You will then notice that if you hold in the little round button
to the left of the menu key, you will switch to the other vfo and when you
release the button you go back to the original vfo. Now all you have to do
is save to memory, and your done.
Bob Tinney, K8LR, [log in to unmask]
Skype, bobtinn
Life is full of challenges, that's what makes it interesting!
----- Original Message -----
From: "Rick" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Thursday, September 02, 2010 12:50 PM
Subject: Re: TS-2000 repeater offset
Hi John.
I tried that on 6 meters, didn't work.
Seems to be stuck in simplex.
----- Original Message -----
From: "John Miller" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, September 01, 2010 4:55 PM
Subject: Re: TS-2000 repeater offset
> should do it if you hit the function button then the round button next to
> the menu button, the one that pressed alone switches to the repeater
> input.
> ----- Original Message -----
> From: "Rick" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Wednesday, September 01, 2010 4:19 PM
> Subject: TS-2000 repeater offset
>
>
>> Hi list.
>> Does anybody know how to set the offset on 6 and 10 meters, and if it =
>> can be done without sighted help?
>> Thanks in advance for any help, and 7 3.
|