BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG

Options: Use Classic View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Topic: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Tom Behler <[log in to unmask]>
Sun, 18 Apr 2010 10:57:55 -0600
text/plain (95 lines)
Don:

Are the instructions below for the T90A, or the THF6A?

I'm looking for the VFO re-set instructions for the THF6A.

Thanks, and 73 from Tom Behler:  KB8TYJ

----- Original Message ----- 
From: "Don Risavy, Jr.; NR4DR" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Saturday, April 17, 2010 8:55 PM
Subject: Re: VFO Re-set for THF6A


> Hello,
>
> Here's the steps for the ICT-901A resets in case haven't gotten them
> already.
>
> This comes from the manual itself or might be a cheat sheet.
>
> Tnx cul 73 nr4dr
>
> All reset
> Reset the CPU before operating the
> transceiver for the first time, or when
> the internal CPU malfunctions to clear
> and return all programmed contents to
> their default settings.
>
> Partial reset
> If you want to initialize the operating
> conditions (VFO frequency, VFO settings,
> set mode contents) without clearing
> the memory contents, a partial
> resetting function is available for the
> transceiver.
>
> All reset
> Push [POWER] for 2 sec. to turn
> power OFF.
> While pushing [BAND], [VFO] and
> [MR], turn power ON to reset the
> CPU.
> "CLEAR" appears when resetting the
> CPU.
> CAUTION: Resetting the CPU returns
> all programmed contents to
> their default settings.
>
> Partial reset
> Push [POWER] for 2 sec. to turn
> power OFF.
> While pushing [VFO], turn power ON
> to partially reset the transceiver.
>
> -----Original Message-----
> From: For blind ham radio operators [mailto:[log in to unmask]]
> On Behalf Of John Miller
> Sent: Saturday, April 17, 2010 7:37 PM
> To: [log in to unmask]
> Subject: Re: VFO Re-set for THF6A
>
> the step size is probably off. Maybe you know how to change that?
> ----- Original Message ----- 
> From: "Tom Behler" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Saturday, April 17, 2010 8:05 PM
> Subject: VFO Re-set for THF6A
>
>
>> Hi, all.
>>
>> As some of you may know, I am traveling on the east coast for the next
>> week.
>>
>> I brought my THF6A with me, and have discovered an interesting problem.
>>
>> Somehow (and I don't know why), whenever I manually enter a frequency 
>> into
>> either the A or B band using the key pad in VFO mode, the displayed
>> frequency is always 5 KC's below the frequency I initially entered.
>>
>> I am thinking that a simple VFO re-set should fix the problem, but don't
>> have my cheat sheet with me.
>>
>> Can someone give me the VFO re-set instructions?
>>
>> If I try that procedure, and it doesn't work, I may have to go to a full
>> re-set, but hopefully not.
>>
>> 73 from Tom Behler:  KB8TYJ
> 

ATOM RSS1 RSS2