Subject: | |
From: | |
Reply To: | |
Date: | Wed, 19 May 2010 08:43:27 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
I think these things went out of production about 20 years ago. Maybe a
little less than that, but still quite a while ago. I bought my R-2000 in
1984. Below are copied 2 segments from the discontinued items section of
the Universal Radio site (a dealer in the USA).
The Kenwood R-1000 covers 200 kHz to 30 MHz in thirty 1 MHz bands with 1 kHz
digital display resolution. Solid performance, straight forward operation
are the strengths of the R-1000. Stable operation and good selectivity
combine to make this radio suitable for demanding voice or RTTY
applications. Refinements include: S-Meter, 12 hour clock-timer (with remote
activation), Noise Blanker, Dimmer, three position attenuator and tone
control.
The carry handle can be swung-away to the top or bottom. The rear panel has
antenna inputs for coaxial or hi-Z wire antennas. 120 VAC. UL listed.
**
The Kenwood R-2000 was the first modestly priced communications receiver to
offer a host of advanced capabilities; succeeding the R-600 and R-1000. The
R-2000 tunes from 100 to 29999.9 kHz in five modes (AM, FM, USB, LSB, and
CW). The R-2000 presents the listener with three different tuning rates (and
a frequency lock) plus convenient 1 MHz UP/DOWN buttons. A noise blanker,
four position attenuator, AGC and all mode squelch are also included. The
ten channel memory stores frequency and mode. The band-scan mode permits the
R-2000 to scan between two user selected frequencies (at three rates!). The
built-in seven digit fluorescent tube digital display indicates frequency to
the nearest 100 Hz. With dimmer switch. The dual 24 hour quartz digital
clock-timer can be used to activate the radio and an auxiliary device
(recorder, etc.) for absentee DXing. The large front mounted speaker insures
good fidelity. The rear panel has input for coaxial or hi-Z wire antennas.
120 VAC. UL listed. There is also the optional VC-10 VHF converter for
additional frequency coverage.
**
I got a lot of use out of my R-2000 and really liked it. The VHF converter
mentioned as an option for the R-2000 is pretty hard to find, I think.
73, Steve KW3A
----- Original Message -----
From: "Kallie Swanepoel" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, May 19, 2010 7:35 AM
Subject: R1000 vs. R2000
> Hi All
>
> What are the differences between the R1000 and R2000? Is the R2000 much
> newer and how are the availability of these receivers, and price and
> accessibility?
>
> 73 ZS6KCS
> Kallie Swanepoel
> Piano Tuner/Klavierstemmer
> http://www.kallieswanepoel.co.za/
> Tel +27 (0) 12 379 3762
> VOIP +27 (0) 87 807 8055
> Mobile +27 (0) 83 261 6942
> Skype kallieswanepoel
>
|
|
|