Subject: | |
From: | |
Reply To: | |
Date: | Thu, 2 Sep 2010 10:26:57 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Rudy:
Speaking/writing as a conservator who has used Acryloid B-72 for a
number of years, this is not an application that I would consider it
for. B-72 is an amazing resin - very stable & very versatile - it is
used as a consolidant, adhesive & coating by conservators. It has a
very high glass transition temperature which makes it a great adhesive
in hot climates (I used to work on excavations in Jordan where heat
tolerance was an issue with any of the ceramics I repaired). Frankly,
I consider it an indoor material - I don't know of anyone using it
outside. If the sign were inside I'd say consider it but not outside.
The other issue with B-72 is the gloss - it can be pretty shiny.
Maybe they need to look at what is being used for traditional
wallpaintings?
Sue Maltby, Conservator
Maltby & Associates Inc.
Quoting Rudy Christian <[log in to unmask]>:
> Well folks, here's another inquiry that came to PTN that seemed best
> mangled by all the Pinheads, not just this one. My suggestion would
> be to build a timber frame enclosure over it and keep the rain and
> sun off!
>
>> My name is Sondra Carson and I am a member of the Landmark
>> Preservation Commission (LPC) in Fort Collins, Colorado. Currently,
>> we are discussing various options to protect a Coke-a-Cola sign
>> that was painted on a brick wall. One of the options presented to
>> the LPC included using Acryloid B 72 to prevent any further
>> deterioration of the flaking paint. I have thoroughly read
>> Preservation Briefs 1 & 2 published by the National Parks Service
>> (published circa 2000). Based on these publications, it is my
>> understanding that water repellents are only indicated as a means
>> to control deterioration or dissolution when water penetration is
>> problematic after repairs have been made to make it watertight.
>
> Even though these water repellents are relatively vapor permeable, I
> couldn't find any literature/journal articles that suggest the
> primary indicated use of Acryloid B72 as a means to preserve a
> historic painted advertisement. In essence, I've been looking for
> the effects of water repellents layered over lead based paint on
> vapor permeability on a masonry wall. I'm guessing it would decrease
> but I don't know how drastic.
>
> So, my question... Is Acryloid B72 (or any other water repellent)
> ever indicated as a protective coating over a historic lead based
> paint advertisement on an exterior masonry wall? I’ve been told
> Acryloid B72 is considered a new and safe water repellent being used
> in the conservation of painted advertisements but I am unable to
> find any research studies/literature/journal articles that can back
> up this opinion.
>
> I would deeply appreciate it if you could shed some light on this for me.<
>
> Suggestions?
>
> Rude E
> Helping put the *Shine* on HP
>
>
>
>
>
> --
> **Please remember to trim posts, as requested in the Terms of Service**
>
> To terminate puerile preservation prattling among pals and the
> uncoffee-ed, or to change your settings, go to:
> <http://listserv.icors.org/archives/bullamanka-pinheads.html>
>
--
**Please remember to trim posts, as requested in the Terms of Service**
To terminate puerile preservation prattling among pals and the uncoffee-ed, or to change your settings, go to:
<http://listserv.icors.org/archives/bullamanka-pinheads.html>
|
|
|