BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Butch Bussen <[log in to unmask]>
Reply To:
For blind ham radio operators <[log in to unmask]>
Date:
Wed, 17 Mar 2010 22:10:03 -0700
Content-Type:
TEXT/PLAIN
Parts/Attachments:
TEXT/PLAIN (74 lines)
If you mean the synthesizer board, then they must have changed them. 
Icom and a e s both say the level adjustment is not on the synthesizer. 
I even called a e s back and had them ook again and they swear there 
isn't  a level adjust on the board.  Very very strange.
73
Butch Bussen
wa0vjr
open Node 3148
Las Vegas


On Wed, 17 Mar 
2010, Anthony Vece wrote:

> Yes, the adjustment is on the board.
> The 746 pro used the same board.
>
>
> Sent from my iPhone
>
> On Mar 17, 2010, at 10:04 AM, Russ Kiehne <[log in to unmask]> wrote:
>
>> The adjustment is on the speech board itself.
>> ----- Original Message -----
>> From: "tom behler" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Tuesday, March 16, 2010 5:55 PM
>> Subject: Re: ic-718
>>
>>
>>>   Butch:
>>>
>>> I swear there is an adjustment in one of the menus for UT102 volume.
>>>
>>> I seem to recall having that problem with mine too, but remember
>>> adjusting
>>> it.  I had to, because it was a rig that I used for Field Day, and
>>> often
>>> in
>>> our motor home, so needed the volume to be a bit higher than usual.
>>>
>>> 73 from Tom Behler:  KB8TYJ
>>>
>>> ----- Original Message -----
>>> From: "Butch Bussen" <[log in to unmask]>
>>> To: <[log in to unmask]>
>>> Sent: Tuesday, March 16, 2010 5:54 PM
>>> Subject: Re: ic-718
>>>
>>>
>>> I did go to a e s and bought the synthesizer and the i-100 tuner.  I
>>> considred getting the at-100, but they didn't have one in stock and I
>>> wasn't sure what the up down manual tuning buttons did and all
>>> that, so I
>>> figured I'd keep it simple, just one button.  On another note, the
>>> synthesizer works, but the level seems low.  It is fine if you
>>> don't have
>>> much signal, but it is covered up by the noise unless I turn the rf
>>> gain
>>> down.  Any suggestions?  I called a e s and they said no level
>>> adjust on
>>> the board.  I called icom and they are supposed to call me back.
>>>
>>> Yep, it is a nice little radio, nice for portable or mobile, just a
>>> simple
>>> little rig.
>>> 73
>>> Butch Bussen
>>> wa0vjr
>>> open Node 3148
>>> Las Vegas
>
>

ATOM RSS1 RSS2