Steve,

I forget which is for full and which is for partial, but here is what you 
do:

Power off

Press and hold either the a/b or a=b key.

While holding in the key turn the power on, then release the key.

At this point the display will  show a message asking if you want to reset. 
To complete the reset, press the key again.  If you do nothing within a few 
seconds, the reset will abort.

Again, it's been a while and I don't remember offhand   which of the keys 
does the full and partial resets.

If you have a lot of memories stored or menu settings changed  from default, 
you may want to back up with MCP-2000 or  other program so you can restore 
later.

73, Steve KW3A

----- Original Message ----- 
From: "Steve Dresser" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, September 16, 2009 8:48 PM
Subject: Resetting the TS-2000


> What is the key sequence for resetting the TS-2000?  My manual says to =
> press NB+0 for a partial reset, and NB+A=3DB for a full reset, but =
> neither of these sequences works for me.  Any help is appreciated.
>
> Steve
>