Mike,

At low drive I do plate, load, plate, load, back and forth at least twice. 
Then the same thing at full drive, plate, load, plate, load,  always ending 
with load.  .   You may or may not see any difference  compared to the way 
you do it, but who knows?
73, Steve KW3A


----- Original Message ----- 
From: "Michael Ryan" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Friday, November 13, 2009 7:34 AM
Subject: Re_tuning amps


>I also use the TW-1 and I wouldn't part with it.=20
> Vary reliable piece of equipment, to bad LDG stopped producing them.
> I also wouldn't shove any more than 1500W through it even though it's =
> rated for 2KW.=20
> Steve: on your tune up proceedure:=20
> You adust plate and load for each drive level you want to operate?=20
> IE: starting off at 10W, adjust plate and load, increase to 100, adjust =
> plate and load again to receive max pwr out?=20
>
> TNX & 73:=20
>
> Michael De VO1RYN =20
>