you can make that wire work, you might just want to use a small screw driver 
and gently help the metal contact in it's slot, I did. If you have the rig 
runner, that's fused, it will be fine. You could add fuses though if you 
want, it's not hard.
----- Original Message ----- 
From: "Richard Fiorello" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, April 21, 2009 8:12 PM
Subject: anderson power poles


>    Hello;
> Thanks everyone for the good info.  When I get ready to sit down and =
> start connecting things I  will let you know how things work out.  I had =
> planned to put power poles on the d c cable for the ldg tw1 but that =
> wire looks like it might almost be to thin.  I wish the cable were =
> fused.
> Richard