Hi John.
Thanks. I don't recall changing it, and it is actually the one that I
bought brand new that is set the wrong way. I have a couple of cheat
sheets that I got off icanworkthisthing.com, so with the info you just gave
me, I think I can figure it out.
73, de Lou K2LKK
At 11:10 PM 4/21/2009 -0400, you wrote:
>it's menu item 4. As I recall, some menu items are eliminated if you're on
>VFO, or memory, but VFO was the best starting point for good menu
>references. I'd be able to tell you actual clicks from 1 if I had mine in
>line but I haven't used it in a very long time but I believe the low beep is
>menu item 1. IF you can hook up both radios at once, you can figure out
>which one has the menu setting different but it's not too hard a radio to
>use. The default is where it selects memory channels by band, so you must
>have changed the one that's not that way unless you got it used. Someone on
>this list got one form me, if it was you that explains it because I had mine
>setup that way. I used to have 2, I still have one.
>----- Original Message -----
>From: "Louis Kim Kline" <[log in to unmask]>
>To: <[log in to unmask]>
>Sent: Tuesday, April 21, 2009 10:48 PM
>Subject: Re: Question on Kenwood TMG707A
>
>
> > If you wouldn't mind, I think I'd like to change the newer radio to match
> > that setting on the other radio.
> >
> > Thanks, and 73 in advance.
> >
> > --Lou K2LKK
> >
> >
> >
> > At 10:24 PM 4/21/2009 -0400, you wrote:
> >>it's a menu setting, I forget which one but can look it up if you want and
> >>don't have the manual or anything. It's a low number, I remember that.
> >>----- Original Message -----
> >>From: "Louis Kim Kline" <[log in to unmask]>
> >>To: <[log in to unmask]>
> >>Sent: Tuesday, April 21, 2009 7:43 PM
> >>Subject: Question on Kenwood TMG707A
> >>
> >>
> >> > Hi.
> >> >
> >> > I'm kind of puzzled about something that I've noticed about the Kenwood
> >> > TMG707A. I have two of these radios, one is probably somewhat older
> >> > than
> >> > the other.
> >> >
> >> > On the new one that I bought as a new radio, when I click through the
> >> > memories, I see all of the memories that have been assigned, regardless
> >> > of
> >> > which band the VFO is on. On the radio that I bought as a used radio,
> >> > I
> >> > only see the memories for the band that my VFO is on. This second
> >> > approach
> >> > is actually a little more useful.
> >> >
> >> > My question is this: Does anyone know why I am seeing the discrepancy
> >> > between the two radios? Is it a menu setting, or was there a firmware
> >> > revision that is responsible for it?
> >> >
> >> > 73, de Lou K2LKK
> >> >
> >> >
> >> >
> >> > Louis Kim Kline
> >> > A.R.S. K2LKK
> >> > Home e-mail: [log in to unmask]
> >> > Work e-mail: [log in to unmask]
> >> > Work Telephone: (585) 697-5740
> >
> > Louis Kim Kline
> > A.R.S. K2LKK
> > Home e-mail: [log in to unmask]
> > Work e-mail: [log in to unmask]
> > Work Telephone: (585) 697-5740
Louis Kim Kline
A.R.S. K2LKK
Home e-mail: [log in to unmask]
Work e-mail: [log in to unmask]
Work Telephone: (585) 697-5740
|