Thanks Bob,  I remember reading that, but it didn't make much sense then.
----- Original Message ----- 
From: "Bob J." <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, January 27, 2009 9:58 PM
Subject: Re: To those who have the TMV71A


> The following was excerpted/edited from the instruction manual...
>
> Selecting a frequency band
>
> You can change the default frequency bands for bands A and B.
>
> 1 Select band A or B by pressing the [BAND SEL] control or [PF2].
>
> 2 Press [F], [BAND SEL] of your selected band.
>
> * Each time you press [F], [BAND SEL], you cycle to the next frequency 
> band.
> * The default setting of the [PF1] key also allows you to cycle to the 
> next
> frequency band.
> * When masking a band {page 71}, you are restricted to using only the
> selectable band.
> * When receiving 2 signals on the same band, the image interference,
> sensitivity, etc.,
> performance will decrease.
> * Band A: 118 >> 144 (default) >> 220 >> 300 >> 430/440 (MHz).
> * Band B: 144 >> 220 >> 300 >> 430/440 (default) >> 1200 (MHz).
>
> Note:
>
> * M4 type models do not have the following frequency bands available:
> 118, 220, 300, or 1200 (MHz).
> * E and M4 type models use the 430 MHz band and K type models use the 440
> MHz band.
>
> Frequency ranges:
>
> * 118 MHz: 118 ~ 135.995 MHz
> * 144 MHz: 136 ~ 199.995 MHz
> * 220 MHz: 200 ~ 299.995 MHz
> * 300 MHz: 300 ~ 399.995 MHz
> * 430/440 MHz: 400 ~ 523.995 MHz
> * 1200 MHz: 800 ~ 1299.995 MHz (excluding cellular band)
>
> hth
>
> 73   Bob   KD8IXD
>
>
> ----- Original Message ----- 
> From: "GARY TILLINGHAST" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Tuesday, January 27, 2009 2:26 PM
> Subject: Re: To those who have the TMV71A
>
>
> Thanks Steve.  I found those and have the mike set for now.  Waiting for
> someone to fill me in on how to flip the A side to the B side.  Gary
> ----- Original Message ----- 
> From: "Steve Dresser" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Tuesday, January 27, 2009 9:09 AM
> Subject: Re: To those who have the TMV71A
>
>
>> Gary,
>>
>> The PF key assignments are in menus 507-512, with 507 and 508 controlling
>> the PF keys on the front of the radio and 509-512 controlling the ones on
>> the microphone.
>>
>> Steve
>>
>> ----- Original Message ----- 
>> From: "Senk, Mark J. (CDC/NIOSH/NPPTL)" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Tuesday, January 27, 2009 06:58
>> Subject: Re: To those who have the TMV71A
>>
>>
>>> There is a menu setting which lets you change the microphone function =
>>> keys.  Change it to "enter" and you can then use the mic to enter a =
>>> frequency in VFO mode or jump to a memory channel.
>>>
>>> Mark
>>> =20
>>>
>>>
>>> Mark J. Senk  |  412-386-6513  |  [log in to unmask]
>>> <img =
>>>
> src=3D"http://212.179.113.209/QRCode/img.php?d=3DBEGIN%3AVCARD%0AN%3AMark=
>>>
> %20J.%20Senk%0ATEL%3A412-386-6513%0AEMAIL%3Azia7%40cdc.gov%0AEND%3AVCARD&=
>>> c=3DContact%20Mark%20Senk&s=3D4"
>>> alt=3D"QR4Senk" />=A0
>>>
>>> -----Original Message-----
>>> From: For blind ham radio operators =
>>> [mailto:[log in to unmask]] On Behalf Of GARY TILLINGHAST
>>> Sent: Monday, January 26, 2009 11:52 PM
>>> To: [log in to unmask]
>>> Subject: To those who have the TMV71A
>>>
>>> Hi all,
>>> This is neat little radio.  This is what ham radios need to be for a =
>>> VIP.  I have a noticed a couple of things that I haven't found in the =
>>> manual yet.=20
>>> Noticed that VHF frequencies are on mode B and the UHF frequencies are =
>>> on mode A.  Is this normal or can I change them around?  Note 2: Can I =
>>> direct enter the memory channels by using the mic?  That will be a start
>>> =
>>> for now.=20
>>> Thanks Gary KB2YAA=20
>>>
>
>
> ----------------------------------------------------------------------------
> ----
>
>
>
> No virus found in this incoming message.
> Checked by AVG - http://www.avg.com
> Version: 8.0.176 / Virus Database: 270.10.13/1916 - Release Date: 
> 1/26/2009
> 7:08 AM


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.176 / Virus Database: 270.10.13/1916 - Release Date: 1/26/2009 
7:08 AM