Subject: | |
From: | |
Reply To: | |
Date: | Mon, 3 Nov 2008 10:52:09 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
John, thanks for the info, I will try it tonight. It most likely is
operator error.
----- Original Message -----
From: "John Miller" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Sunday, November 02, 2008 7:40 PM
Subject: Re: LDG AT1000 antenna tuner problem
> If you push the button on that frequency, it should toon it, remember
> though, if you have a memory set there, you have to hold the button in for
> like 2 seconds and let it tune then instead of pushing it quicker for
> recalling the closest memory., that will erase the memory on that
> frequency
> if there is one and make a new one.
> ----- Original Message -----
> From: "Fred Adams" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Sunday, November 02, 2008 7:30 PM
> Subject: LDG AT1000 antenna tuner problem
>
>
>>I have an LDG AT-1000 auto antenna tuner and it tunes all frequencies well
>> except one and this one is 3.865. I am wondering if this frequency is
>> stored
>> in the memory and was put there before I put up this antenna. I had a
>> double bazooka for 75 meters up for years but I took it down about three
>> months ago and replaced it with the dipole that I am now using. Does
>> anyone
>> know how to clear the old memory that might still be there? I have
>> retuned
>> all of the other frequencies without any problems. Any suggestions will
>> be
>> appreciated. This AT1000 is not the pro model. The tuner tunes on this
>> frequency but will only bring the standing wave down to 1.6 and this has
>> me
>> baffeled.
>>
>> Best Wishes,
>>
>>
>> FRED C. ADAMS W4HC
>> SOW TO THE WIND
>> AND REAP THE WHIRLWIND!!
|
|
|