Subject: | |
From: | |
Reply To: | |
Date: | Sat, 4 Oct 2008 20:09:49 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
There is not a range switch on the TW-1. It will give some kind of voice
reading at a few tenths of a watt, although I would believe it starting at a
few watts. When set to generate a tone, the pitch barely moves at a couple
of watts, once the tone starts, and goes up by almost a musical fifth at 100
watts. I've never driven it with more than 140 watts, so don't know what
the pitch is at higher power levels.
Lloyd Rasmussen, W3IUU, Kensington, Maryland
Home: http://lras.home.sprynet.com
Work: http://www.loc.gov/nls
> -----Original Message-----
> From: For blind ham radio operators [mailto:[log in to unmask]]
> On Behalf Of Eric Clegg
> Sent: Saturday, October 04, 2008 7:35 PM
> To: [log in to unmask]
> Subject: Re: TW1 is absolutely terrific!
>
> Hi Tom,
> That talking watt meter is supposed to be used down to qrp levels.
>
> If you could only tune effectively using 100 watts you might explore if
> there is a range switch on it.
>
> 73,
>
> Eric
> KU3I
|
|
|