Subject: | |
From: | |
Reply To: | |
Date: | Thu, 16 Jun 2005 21:19:36 +0100 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
And what does the shop say about this?
George.
-----Original Message-----
From: VICUG-L: Visually Impaired Computer Users' Group List
[mailto:[log in to unmask]] On Behalf Of Peter
Seymour
Sent: 17 June 2005 00:10
To: [log in to unmask]
Subject: [VICUG-L] Component failure when cable is attached
Hello,
I recently had a new power source installed into my old DOS
computer. That and a new fan were the only things that were
replaced. The shop also did a check of the hard drive, which
is fine.
Here's the strange thing. When I plug my scanner into the
computer's port, the scanner goes into a semi-off mode that
I've never encountered before.
When I pull the data cable either out of the back of the
computer, or out of the side of the scanner, the scanner
makes the familiar sounds of being turned on and ready to
scan. With these sounds, I can see a bright ON light. But
when I plug the cable in, that light goes off, and a much
smaller indicator light remains on.
Also, with the cable in, the OSCAR OCR/scanning program
says, "scanner not available" when I give the command to
scan.
What can be going on here? I've used this system for many
years and never had this problem.
Thanks,
Peter
VICUG-L is the Visually Impaired Computer User Group List.
To join or leave the list, send a message to
[log in to unmask] In the body of the message,
simply type "subscribe vicug-l" or "unsubscribe vicug-l"
without the quotations.
VICUG-L is archived on the World Wide Web at
http://maelstrom.stjohns.edu/archives/vicug-l.html
VICUG-L is the Visually Impaired Computer User Group List.
To join or leave the list, send a message to
[log in to unmask] In the body of the message, simply type
"subscribe vicug-l" or "unsubscribe vicug-l" without the quotations.
VICUG-L is archived on the World Wide Web at
http://maelstrom.stjohns.edu/archives/vicug-l.html
|
|
|