Content-transfer-encoding: |
7bit |
Sender: |
|
Subject: |
|
From: |
|
Date: |
Wed, 4 Apr 2007 19:02:48 -0400 |
MIME-version: |
1.0 |
Content-type: |
text/plain; format=flowed; charset=iso-8859-1; reply-type=original |
Reply-To: |
|
Parts/Attachments: |
|
|
I wonder if this modem is not PnP? If not there may be jumper options which
need to set on the modem card. (?)
William
----- Original Message -----
From: <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, April 04, 2007 5:16 PM
Subject: [PCBUILD] modem port setting
> Greetings All,
>
> I am re-vamping an old Compaq 7478. I installed a fresh copy of windows
> 98se
> but had problems with display drivers so I installed a radeon 9250 PCI
> card
> and display works great. Now I'm having trouble with windows locating the
> Actiontec modem. It appears in device manager and is assigned to com port
> 5 but
> in control panel/system only port 1 is listed. I used add hardware wizard
> to
> add four more com ports but now in system the listed ports are 1, 2, 3, 4
> and
> 6. I can't find a way to change what port the modem is assigned to.
>
> Since I had to move the modem to a different slot to make room for the
> video
> card, I wonder if this has somehow caused the problem (are port numbers
> associated with slot numbers?).
>
> I've tried un-installing and re-installing the modem both physically and
> through the add new hardware wiz.
>
> What should I try?
>
> Many Thanks,
> -Phil Williams-
>
>
>
> ************************************** See what's free at
> http://www.aol.com.
>
> Visit our website regularly for FAQs,
> articles, how-to's, tech tips and much more
> http://freepctech.com
>
Visit our website regularly for FAQs,
articles, how-to's, tech tips and much more
http://freepctech.com
|
|
|