I have a commercial, I believe, desk mic like that. It takes a 1/4 inch plug 
in to the back of it wired like that and right now it's wired for a 4 pin 
Kenwood. I have no clue where the mic came from, no one's ever heard of it 
but it sounds pretty close to the MC-50. I need to clean the PTT button 
though. It has 2 mic hookups but no switch between the 2 so I'd never hook 
up 2 radios to it. Anyway, I've seen a lot of old radios like that over the 
years, very easy to wire up to.
----- Original Message ----- 
From: "Clarence Williamson" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, March 25, 2008 9:17 AM
Subject: Re: mic pin-out for a tentec triton iv


> Hi Gary and the Group,
> The plug is a standard 1/4 inch sterio plug.  I suspect and someone 
> confirmed it on the list, that the sleeve is ground, the ring is audio in, 
> and the tip is ptt.  This was sort of a standard for radios made in that 
> time period.
> Thanks,
> Clarence
>
>
>> ----- Original Message -----
>>From: Gary Lee <[log in to unmask]
>>To: [log in to unmask]
>>Date: Tue, 25 Mar 2008 07:51:16 -0400
>>Subject: Re: mic pin-out for a tentec triton iv
>
>>Sir:
>
>>What connector does that use for the mike?
>>1/4 inch phone type plug, or four pin round?
>>Let me know and I'll try to help.
>
>>----- Original Message -----
>>From: "Clarence Williamson" <[log in to unmask]
>>To: <[log in to unmask]
>>Sent: Monday, March 24, 2008 9:26 PM
>>Subject: mic pin-out for a tentec triton iv
>
>
>>> Hi folks,
>>> Does anyone know the mic pin-out for a tentec triton iv.
>>> I recently got the radio, but the mic is missing the plug.
>
>>> Thanks in advance,
>>> Clarence (wd8bah)
>